Calculating Tire Pressure: Ideal Gas Law and Temperature Change

  • Thread starter Thread starter zcabral
  • Start date Start date
  • Tags Tags
    Pressure
AI Thread Summary
The discussion focuses on calculating tire pressure using the ideal gas law, specifically the equation P1V1/T1 = P2V2/T2. The original air temperature is 10.0°C, and after compression to 26.0% of its volume and heating to 32.0°C, the pressure needs to be determined. A participant initially calculated the pressure as 4.15 Pa but was informed that this value is incorrect due to unit conversion errors. It was suggested that the atmospheric pressure should be converted to pascals, approximately 1.013 x 10^5 Pa, to obtain the correct result. Accurate unit conversion and inclusion of initial pressure are crucial for solving the problem correctly.
zcabral
Messages
30
Reaction score
0

Homework Statement


An automobile tire is inflated with air originally at 10.0°C and normal atmospheric pressure. During the process, the air is compressed to 26.0% of its original volume and the temperature is increased to 32.0°C.
What is the tire pressure? Pa




Homework Equations


Pv=nRT P1V1/T1= P2V2/T2


The Attempt at a Solution



i used p1v1/t1=p2v2/t2 and got 4.15 Pa but it was wrong
 
Physics news on Phys.org
make sure you have the same units for p1 and p2
 
yes i checked it. i used 1 atm for the original pressure and then changed it to pa
 
Hi zcabral,

It's difficult to follow your calculation without knowing the numbers you put into your calculation.

However, here I think you forgot to include p1 in your calculation. Or did you not convert it? Atmospheric pressure in pascals is about 1.013\times 10^5 (did you use that number?), so the pressure your getting in your first post is tiny.
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

What is the relationship between tire size and pressure changes?
Replies
13
Views
979
How Does Changing Temperature and Pressure Affect Gas Density?
Replies
3
Views
2K
Calculating Tire Pressure Change with Temperature Increase
Replies
2
Views
1K
Why does a gas behave as ideal if the Isotherm and Isenthelp
Replies
3
Views
1K
Adiabatic Expansion of Pressurized Air in a Piston-Cylinder Setup
Replies
8
Views
2K
Gas temperature in a constant volume
Replies
8
Views
2K
Find Heat Energy Needed to Expand Gas to Triple Volume
Replies
2
Views
2K
Ideal Gas Equation and Polytropic Constant
Replies
3
Views
5K
Calculate the ratio of new volume to old volume
Replies
2
Views
3K
How Does Temperature Affect Tire Pressure?
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top