Electric Fields , Finding final velocity. NEED HELP

AI Thread Summary
To find the final velocity of charge Q1 when released from a distance of 12 cm from stationary charge Q2, the initial method using constant acceleration was incorrect due to varying acceleration. Instead, applying the conservation of energy principle is recommended. The work done by the electric force was calculated, leading to the conclusion that the potential energy change equals the kinetic energy gained. After recalculating with the correct force at 20 cm, the final velocity was determined to be approximately 28.3 m/s, aligning with the answer key. Using energy methods provides a more accurate solution for this scenario.
skye204
Messages
3
Reaction score
0

Homework Statement


Mass= 15g
Q1= 8.0uC
Q2= 25 uC (stationary)

Q1 is released from a point 12cm from Q2. How fast will Q1 be moving when the separation is 20cm.


Homework Equations



F=ma
F=qe
F=kQq/r2
E=kQ/r2
Ke=mv2/2
W=FD
vf2=vi2+2ad

The Attempt at a Solution


F=(9x109)(25x10^-6)(8x10^-6)/(.12^2)
F=125N

F=MA
125/0.015= A
A= 8333m/s2

vf2=vi2+2ad
vf2=0+2(8333)(.20-.12)
vf=36.5m/s

ACTUAL ANSWER IS : 28.3 according to the answer key

Thanks for help!
 
Physics news on Phys.org
Hi skye204! Welcome to PF :smile:

The formula that you've used i.e "vf2=vi2+2ad" is applicable only when the acceleration is constant. In this case acceleration changes, so this is not applicable. I would suggest you apply the energy conservation principle instead :wink:
 
vf2=vi2+2ad
vf2=0+2(8333)(.20-.12)
vf=36.5m/s



you can not use the above formula as the acceleration is not constant.
you should try using energy method.
 
I get it

W=FD
W=125N x.12
W= 15

F=(9x109)(25x10^-6)(8x10^-6)/(.2^2)
F=45N


W=45 x .2
W= 9

pe=pe' + ke'
15= 9 + 0.015(v^2)/2
v= 28.28

Thanks!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top