Electric Force: Equilateral Triangle

AI Thread Summary
The discussion centers on calculating the electric force on one of the +Q charges in an equilateral triangle configuration with two +Q charges and one -Q charge. The participant has derived the forces acting on the chosen +Q charge but is uncertain about the accuracy of their calculations and the direction of the resultant force. Key equations and components of the forces are discussed, including the use of trigonometric functions to resolve the forces into x and y components. Suggestions are made to verify algebraic steps and to use a diagram for clarity in determining the net force and its direction. The final direction of the resultant force is indicated to be towards the east.
Sirmeris
Messages
1
Reaction score
0

Homework Statement


Three charges, +Q, +Q, and -Q are placed at the vertices of an equilateral triangle of length "s" on a side. Find the magnitude and direction of the force on one of the +Q charges.


Homework Equations


ForceElectric=(K*q1*q2/d2)


The Attempt at a Solution


I've set the triangle up so that the bottom side is parallel to the x-axis. My +Q charges are in both the bottom left (charge 1) and bottom right (charge 3) corners, while the -Q charge (charge 2) is at the top. Charge 3 is the charge that I have chosen to do the calculation for.

Force2 on 3 = (2QK/s2)

Force2 on 3 = Force1 on 3, so Force1 on 3 = (2QK/s2)

x-component: Forcex:2 on 3 = (2QK/s2)*cos(60°) = (QK/s2)

y-component: Forcey:2 on 3 = (2QK/s2)*sin(60°)



∑Fx = Force1 on 3 - Forcex:2 on 3

∑Fx = (2QK/s2) -(QK/s2)


∑Fy = Forcey:2 on 3

∑Fy = (2QK/s2)*sin(60°)




Fnet = ∑Fy + ∑Fx (vector equation)

Fnet = √((∑Fy)2 + (∑Fx)2)

Simplified this (hopefully) goes to:



Fnet = (2QK/s2)

This was my final answer for the magnitude, but I'm not even sure if it is correct, or if my procedure is right. I'm also not sure how to find the direction. Any help would be greatly appreciated! Thank-you!
 
Physics news on Phys.org
Hi Sirmeris. Welcome to Physics Forums.

Force2 on 3 = (2QK/s2)
Check your algebra ...

Q x Q = Q2
 
Fnet = ∑Fy + ∑Fx (vector equation)
Once you have ∑Fx and ∑Fy you can determine the magnitude using Pythagoras, as you show, and the angle, θ, of that vector is given as

θ = tan-1 (∑Fy / ∑Fx)

Always wise to sketch these, so you can be sure to give your final answer in the correct quadrant.
 
Hi Sirmeris
Use this diagram to find net force on +Q.
Net.F=√(F^2+F^2+2F*Fcosθ)
θ=120.In this problem force on +Q due to -Q and other +Q charge is equal.
 
Untitled.png
this is the figure.
What should be the direction of the resultant.
 
Satvik Pandey said:
View attachment 71444 this is the figure.
What should be the direction of the resultant.
East
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top