[Electricity & Magnetism] Finding the voltage of a battery.

AI Thread Summary
The discussion revolves around calculating the voltage of a battery in a circuit involving capacitors A, B, and C. The user outlines their approach, starting with finding the equivalent capacitance of capacitors A and B in parallel, and then determining the voltage across capacitor C to ultimately find the battery voltage. Other participants confirm the user's method is generally correct but suggest simplifying the approach by considering the capacitors as impedance loads. They recommend using concepts from impedance, such as reactance, to streamline the calculations. Overall, the user is on the right track but is encouraged to rethink their strategy for efficiency.
24karatbear
Messages
34
Reaction score
0

Homework Statement


Hello. I just need someone to check if I'm approaching the problem correctly (the steps I've taken are given below).

I drew a quick sketch of the circuit here: http://i.imgur.com/mClttXn.png?1

In the problem, I am given the capacitances of A, B, and C. I am also given the voltage across capacitor B. My goal is to find the voltage of the battery.

Homework Equations


Equivalent capacitance (series) = (cap1*cap2)/(cap2+cap1)
Equivalent capacitance (parallel) = cap1 + cap2 + ... + capn
Voltage = Q/C
Total voltage (series) = V1 + V2
Charge = CV

The Attempt at a Solution


Here are the steps I would take to find the voltage of the battery:

I first find the equivalent capacitance across A and B, the two caps in parallel. Since capacitors in parallel have equal voltages, the voltage across the combined capacitor is the same as the one across capacitor B (let's pretend it was 9V. So the voltage across the combined cap is 9V).

Now, I have the combined cap in series with capacitor C. Since the voltage across the battery is the sum of the voltages of the combined cap and cap C (please correct me if I'm wrong here), I need to find the voltage across C. To do this, I'll need the charge on C. Since the two caps are in series, I can find the charge Q of cap C by finding the charge Q on the combined cap (since the two charges should be equal). Once I find Q, I just divide that by the capacitance of C to obtain the voltage across C.

The voltage of the battery = voltage across combined cap + voltage across C.

Am I doing this correctly?
 
Physics news on Phys.org
Your method looks okay.
 
  • Like
Likes 24karatbear
gneill said:
Your method looks okay.
Thank you!
 
Yep you are on track, you only made it much harder than it is. Think of the caps as Impedance loads (Z), Just happen to be capacitance this time.

you got Series and || down for them.

Think to use a Voltage diver... Xc is 1/wc and Xl is wL and Xr is just R

If you think Impedance be easier if one of the Caps is a R or an L. I think Z ...
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top