Electrolytic Cell: Anode, Cathode & Charge Explained

  • Thread starter Thread starter kristof
  • Start date Start date
  • Tags Tags
    Cell
AI Thread Summary
The discussion revolves around the confusion regarding the charge of electrodes in an electrochemical cell, specifically why the anode is considered positive despite electrons flowing out of it. It is clarified that the anode attracts anions because it has a higher potential due to a lack of electrons, creating a positive charge relative to the cathode. The concept of potential difference is emphasized, indicating that a charge difference exists even with the flow of electrons. Additionally, during electrodeposition, metal cations are reduced at the cathode but remain attached to the electrode due to electrostatic forces, rather than flowing back into the solution. The conversation highlights the importance of understanding charge dynamics and potential in electrochemical systems.
kristof
Messages
3
Reaction score
0
Hello

Please help me with this.

Cathode has negative charge, anode has positive charge. Electrons travel from anode to cathode.

Question 1: why is anode positive and attracts anions? How can the charge build up on this electrode if electrons are constantly flowing out of this electrode? If it has constant supply of electrons, then it also should be negative.. I would understand that anions would be attracted to it if the charge was fixed and positive. I understand that there would be a lack of electrons causing positive charge at anode and negative at cathode. But I don't understand what causes anode to be of positive charge.

If you can, please answer also the second question:
Question 2: During electrodeposition on the cathode, a potential is appied and metal cations become reduced to zero charge (in anodic stripping voltammetry). In case of using glassy carbon electrode, they are deposited on the electrode and stripped back into the solution which causes faradaic current to flow into the cathode and is indicative of the metal concentration in the solution. Is that correct understanding of this? If so, when the metal cations are becoming reduced at cathode, why they don't flow back into the solution? There are no forces holding them onto the glassy carbon electrode (no amalgamate is formed).
 
Chemistry news on Phys.org
kristof said:
why is anode positive and attracts anions? How can the charge build up on this electrode if electrons are constantly flowing out of this electrode?

If you observe potential difference, you can be sure there is a charge difference - by the definition of potential. So apparently there is something wrong with the idea that flowing electrons mean no charge difference, as half of physics would be wrong if you were right.

Think about the situation we observe when there is a water flowing between two tanks located at different heights. When the water level difference is zero, water doesn't flow, but you need some time to reach that point, as the flow speed is not unlimited. Situation with the electrodes and charges is not identical, but in many ways analogous.
 
Thanks Borek, I didn't say I'm right , I said I just don't get it. Still don't get it. Even if there is charge difference due to potential difference, why is the anode positive if eletrons are flowing out of it constantly? If electrons are flowing through it and coming out of it , why is it not negative?
 
It is "positive" relative to cathode, doesn't mean it is really positive.

Besides, presence of electrons doesn't make something automatically negative, Fe2+ is positive even if it has 24 electrons.
 
of course! thanks Borek, why didn't I think about it already.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top