Electrostatic Equilibrium: Where to Place a Third Charge?

AI Thread Summary
In the discussion on electrostatic equilibrium, participants analyze the placement of a third charge, q3, relative to two existing charges, q1 and q2, under different scenarios. For like charges (a), it is concluded that q3 must be positioned between q1 and q2, with a calculated distance of -0.25m indicating a potential typo. In the case of unlike charges (b), it is determined that no position exists for q3 to achieve equilibrium, as the forces cannot balance out due to the opposite nature of the charges. For the specific charges given in (c), participants initially miscalculate the position of q3, leading to confusion about the correct placement, which is ultimately clarified to be at -0.94m. The discussion emphasizes the importance of understanding the relationships between forces and distances in electrostatic systems.
endeavor
Messages
174
Reaction score
0
"Two charges, q1, and q2, are located at the origin and at (0.50m, 0), respectively. Where on the x-axis must a third charge, q3, of arbitrary sign be placed to be in electrostatic equilibrium if (a) q1 and q2 are like charges of equal magnitude, (b) q1 and q2 are unlike charges of equal magnitude, and (c) q1/sub] = +3.0 microCoulombs and q2 = -7.0 microCoulombs?"

for (a), I thought since they are like charges, q3 can only be in electrostatic equilibrium if it's between the two charges.
let r = distance from (0,0)
F31 = F32
(kq3q1)/r2 = (kq3q1)/(0.50-r)2
r2 = (0.50-r)2
r = 0.25 m
but the answer is -0.25m. Is that a typo?

for (b), I thought since they are opposite charges, q3 can only be in equil. if it's not between the two charges.
let r = distance from (0,0) or (0.50, 0)
F31 =- F32 (is it correct to put the negative sign here?)
(kq3q1)/r2 = -(kq3q1)/(0.50+r)2
r2 = (0.50+r)2
0 = 0.50
but this doesn't make sense, so there is no location for q3 to be in equilibrium. (This answer is correct, but I think I could've solved it by just thinking about it... but I'm not sure how)

for (c), I thought the only place for q3 (regardless of its sign) is to the left of (0,0)
F31 =- F32
(kq3q1)/r2 = -(kq3q1)/(r+0.50)2
q1(r+0.50)2 = -q2r2
(q1 + q2)r2 + q1r +0.25q1 = 0
I use the quadratic formula, and take only the negative root, since r < 0
r = -0.20m. So q3 would be at (-0.20,0).
but the answer here is -0.94m
 
Physics news on Phys.org
endeavor said:
"Two charges, q1, and q2, are located at the origin and at (0.50m, 0), respectively. Where on the x-axis must a third charge, q3, of arbitrary sign be placed to be in electrostatic equilibrium if (a) q1 and q2 are like charges of equal magnitude, (b) q1 and q2 are unlike charges of equal magnitude, and (c) q1/sub] = +3.0 microCoulombs and q2 = -7.0 microCoulombs?"

for (a), I thought since they are like charges, q3 can only be in electrostatic equilibrium if it's between the two charges.
let r = distance from (0,0)
F31 = F32
(kq3q1)/r2 = (kq3q1)/(0.50-r)2
r2 = (0.50-r)2
r = 0.25 m
but the answer is -0.25m. Is that a typo?

Yes, that is a typo
for (b), I thought since they are opposite charges, q3 can only be in equil. if it's not between the two charges.
let r = distance from (0,0) or (0.50, 0)
F31 =- F32 (is it correct to put the negative sign here?)
(kq3q1)/r2 = -(kq3q1)/(0.50+r)2
r2 = (0.50+r)2
0 = 0.50
but this doesn't make sense, so there is no location for q3 to be in equilibrium. (This answer is correct, but I think I could've solved it by just thinking about it... but I'm not sure how)
One way to see it quickly is this: You know that it cannot be between the two charges because of the signs of the charges (the two forces must be in opposite directions for them to cancel out). Now, you must also impose that the *magnitudes* of the two forces must be the same for them to cancel out. But the charges q1 and q2 have the same magnitude..therefore the *distance* q1 to q3 and q2 to q3 must be the same...But wait! That's impossible if we are not between the charges. QED
for (c), I thought the only place for q3 (regardless of its sign) is to the left of (0,0)
F31 =- F32
(kq3q1)/r2 = -(kq3q1)/(r+0.50)2
q1(r+0.50)2 = -q2r2
(q1 + q2)r2 + q1r +0.25q1 = 0
I use the quadratic formula, and take only the negative root, since r < 0
r = -0.20m. So q3 would be at (-0.20,0).
but the answer here is -0.94m
I will tell you in a minute
 
endeavor said:
"Two charges, q1, and q2, are located at the origin and at (0.50m, 0), respectively. Where on the x-axis must a third charge, q3, of arbitrary sign be placed to be in electrostatic equilibrium if (a) q1 and q2 are like charges of equal magnitude, (b) q1 and q2 are unlike charges of equal magnitude, and (c) q1/sub] = +3.0 microCoulombs and q2 = -7.0 microCoulombs?"



for (c), I thought the only place for q3 (regardless of its sign) is to the left of (0,0)
F31 =- F32
(kq3q1)/r2 = -(kq3q1)/(r+0.50)2
q1(r+0.50)2 = -q2r2
(q1 + q2)r2 + q1r +0.25q1 = 0
I use the quadratic formula, and take only the negative root, since r < 0
r = -0.20m. So q3 would be at (-0.20,0).
but the answer here is -0.94m


No, because the meaning of "r" in this equation is that it is a *distance*!
(this is why you use (r+0.50)). So when you solve, you *must* have a positive value for r. Once you know the distance from the origin, then you get the *x coordinate* by saying x=-r.
 
Thanks a lot nrged! I get it now :smile:
 
Two charges, q1, and q2, are located at the origin and at (0.50m, 0), respectively. Where on the x-axis must a third charge, q3, of arbitrary sign be placed to be in electrostatic equilibrium if (a) q1 and q2 are like charges of equal magnitude, (b) q1 and q2 are unlike charges of equal magnitude, and (c) q1/sub] = +3.0 microCoulombs and q2 = -7.0 microCoulombs?"

for (a), I thought since they are like charges, q3 can only be in electrostatic equilibrium if it's between the two charges.
let r = distance from (0,0)
F31 = F32
(kq3q1)/r2 = (kq3q1)/(0.50-r)2
r2 = (0.50-r)2
r = 0.25 m

I have almost the same exact problem in my homework. All except c is the same. I am comfused on making the relationship between F31 and F32. If they are equal, how can we have /(0.50-r)2? My question is, how do we know it is .5-r? not .5+r? Either way, I don't understand how one know to write any number -r or +r. I need some conceptual help or something.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top