How Do You Calculate the Flux of a Vector Field Through a Parametric Surface?

AI Thread Summary
To calculate the flux of the vector field F = [x,y,z] through the parametric surface S defined by r(u,v) = [u cos v, u sin v, u^2], one must first determine the surface area element dA using the Jacobian of the transformation. The flux can be computed using the integral of the dot product of the vector field and the surface area element, expressed as flux = ∫(F · dA). It is important to correctly set the limits for the parameters u and v, which range from 0 to 2 and 0 to 2π, respectively. The discussion also highlights the need for clarity on whether the divergence of F is relevant to the problem. Understanding these concepts will ensure the correct approach to solving the flux calculation.
lazyluke
Messages
12
Reaction score
0

Homework Statement


1. The expression F = [x,y,z] defines a vector field. Given the parametric representation of a surface S:[u cos v, u sin v, u^2] = r (u,v), where the parameters cover the ranges 0 ≤ u ≤ 2 and 0 ≤ v ≤ 2π, calculate the flux F through the surface S.

Homework Equations


How do i start this problem?

The Attempt at a Solution


I know the transformation equations for the cylindrical coordinates, and:
flux=Int(E dot dA=Int(divergence of E d tao
Im not sure if i should find the jackobian, but if so how do i work with the parametric representation vector r??

P.S. sry about spelling
 
Last edited:
Physics news on Phys.org
Am i even in the right department with those questions?
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Egg Drop Challenge! Need ideas for winning designs'

I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
View full post »

Similar threads

Flux through a cylindrical surface enclosing part of a sphere
Replies
9
Views
548
Flux of constant magnetic field through lateral surface of cylinder
Replies
7
Views
2K
Electric flux through ends of an imaginary cylinder
Replies
7
Views
2K
Electric Field Inside Cylindrical Capacitor
Replies
2
Views
2K
Electric Flux through Cubical Surface Enclosing Sphere
Replies
2
Views
4K
What is the induced magnetic force on this closed current loop?
Replies
12
Views
2K
Does a Bent Wire Affect Induction Calculations?
Replies
7
Views
2K
Flux of a vector and parametric equation
Replies
5
Views
1K
Finding the Flux of a Vector Field
Replies
13
Views
3K
I How do I parametrize a conical/cylindrical surface in cylindrical unit vectors?
Replies
7
Views
3K

Hot Threads

Recent Insights

Back
Top