Energy Stored in Magnetic Field of Solenoid

AI Thread Summary
The discussion centers on calculating the energy stored in the magnetic field of a solenoid with a specified length and diameter. The user initially applies the formula U=(1/2)(B^2)(area*length)/(u) but encounters an issue with their calculated result. A suggestion is made to verify the value used for permeability in the equation. The user acknowledges the oversight and expresses gratitude for the assistance. The conversation highlights the importance of accurate constants in physics calculations.
x^2
Messages
19
Reaction score
1

Homework Statement


The magnetic field inside an air-filled solenoid 39.9cm long and 2.00cm in diameter is 0.800T. Approximately how much energy is stored in this field?


Homework Equations



U=(1/2)LI^2
=> U = (1/2)(B^2)(area*length)/(u)

The Attempt at a Solution


I discovered how to derive the bottom equation from the top equation from http://hyperphysics.phy-astr.gsu.edu/HBASE/electric/indeng.html#c2

The derivation on the site seems to make sense, but when I try to use the bottom equation I get:
U = (1/2)(0.8^2)(Pi*0.01^2)*(0.399)/(8.85*10^-7) = 45.324 J

What am I missing here?

Thanks,
x^2
 
Physics news on Phys.org
Check the value you use for permeability.
 
Kurdt said:
Check the value you use for permeability.

Oh wow do I feel stupid now... Thanks for the help!
x^2
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
15
Views
1K
Replies
3
Views
1K
Replies
3
Views
3K
Replies
5
Views
2K
Replies
21
Views
5K
Replies
4
Views
941
Replies
5
Views
3K
Back
Top