Need a good Introduction to Circuit Analysis book

AI Thread Summary
For those studying electrical engineering and seeking a solid introduction to circuit analysis, "Basic Engineering Circuit Analysis" by J. David Irwin is the assigned textbook, though its effectiveness has been questioned. Students recommend purchasing the book to familiarize themselves with the material early, as it will be necessary for the course. Engaging with the textbook can help clarify any questions that arise, allowing for better understanding. If the book proves challenging, further recommendations can be sought later. Starting with the assigned text is a practical approach to prepare for upcoming classes.
dk702
Messages
6
Reaction score
0
Need a good "Introduction to Circuit Analysis book"

I am studying to be an EE and will be taking my first circuits, and computer engineering classes this fall and would would really like to get a head start on the material. The textbook for the circuits course is "Basic Engineering Circuit Analysis" by J. David David Irwin. I do not know what the textbook for the computer engineering course will be. I have heard that the circuits book is not that great and the example problems are not that helpful. The only experience I have with circuits was in my physics 2 course(basic RC, RL LC and LRC circuits). Any one have any recommendations?
 
Engineering news on Phys.org
Well, in order to save some money I'd recommend purchasing the book (since you will need it anyway) and try going through it for yourself. Since neither of us are familiar with this book why not get aquainted with it asap. Questions you may have can then be posted and if it still seems like a tough read perhaps a recommendation can then be made.

Good luck
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Back
Top