Figuring acceleration using time and the reading of a weight scale help please

AI Thread Summary
To calculate acceleration using a weight scale reading in an elevator, the student's mass must be derived from their weight (500 N). When the scale reads 700 N, the net force indicates an upward acceleration, calculated as 13.72 m/s² after accounting for gravity. Conversely, when the scale reads 200 N during downward motion, the downward acceleration is found by subtracting the calculated acceleration from gravity, resulting in 3.92 m/s². It's crucial to apply the net force equation correctly and consider the direction of acceleration. A free-body diagram can aid in visualizing the forces involved.
benji
Messages
48
Reaction score
0
I'm new to this stuff, so the question may be really simple, but I just can't work it right...

Alright, so the question I'm trying to figure is this:

The student's normal weight is 500 N. He stands on a scale in an elevator and records the scale reading as a function of time.

So for the first 5 seconds the scale is at 500 N, thus the acceleration is 0 m/s/s. Then the next 5 seconds the scale reading is at 700. Now how do I go about figuring the acceleration?

I know F=ma. The only way I could think of solving this problem is putting the difference in for the force variable, the students weight in for the mass variable and then solving for acceleration.

So for example for the second 5 seconds I used 200=500a and I got 0.4 m/s/s. This doesn't seem like the right answer so I must be missing something or just going about the problem completely the wrong way. If someone could point me in the right direction I'd really appreciate it!
 
Physics news on Phys.org
You have it mostly right, the 'm' in the equation is the student's mass, not weight. weight = mass*gravity.
 
500/9.8 = 700/x

Cross multiply, solve for x, subtract g, and that is your acceleration upward.
 
ek said:
500/9.8 = 700/x

Cross multiply, solve for x, subtract g, and that is your acceleration upward.

If I did it this way I do 500/9.8=700/x and x=13.72m/s/s. But then the last 5 seconds of the boys motion is downward and the scale reads 200N (300N0 lighter (when he was going up in the second 5 seconds the scale was 200N heavier [700N]). When I do 500/9.8=300/x I get x=5.88m/s/s. That doesn't seem right... So I assume I add 5.88m/s/s to gravity, then I get 15.68m/s/s.

...is that correct?
 
No. You are using the formula F_{net}=ma, meaning the net force is accounted for (including gravity). You should really be starting all these problems with a free-body diagram, BTW.

Review your work with this in mind and remember that your final answer should be negative because you defined the upward direction as positive.
 
benji said:
If I did it this way I do 500/9.8=700/x and x=13.72m/s/s. But then the last 5 seconds of the boys motion is downward and the scale reads 200N (300N0 lighter (when he was going up in the second 5 seconds the scale was 200N heavier [700N]). When I do 500/9.8=300/x I get x=5.88m/s/s. That doesn't seem right... So I assume I add 5.88m/s/s to gravity, then I get 15.68m/s/s.

...is that correct?
Your first part is right. 13.72 - 9.8 is the acceleration.

For the second part, since it's the opposite direction, you subtract that number from 9.8, instead of the other way around, to get the acceleration downwards. In this case it would be 9.8-5.88=3.92 m/s^2.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top