Finding current and equivalent resistance

AI Thread Summary
To find the current through points C, D, and G in the circuit with a 48.0 V battery and five resistors, the equivalent resistance was calculated as 193 Ω. The next step involves using Kirchhoff's Current and Voltage Laws to determine the voltage drop across R1, which will aid in calculating the currents through the other resistors. The currents at points C and G will be the sum of the currents at R4 and R5. By applying the voltage drop to the remaining resistors, the individual currents can be determined. Understanding these principles is crucial for solving the circuit problem effectively.
snakefashion
Messages
1
Reaction score
0

Homework Statement


The circuit consists of a battery (V0 = 48.0 V) and five resistors (R1 = 111 Ω, R2 = 182 Ω, R3 = 663 Ω, R4 = 334 Ω, and R5 = 465 Ω). Find the current passing through C, D, and G.
VTqne9.png


Homework Equations


V=IR

The Attempt at a Solution


I tried to find the equivalent resistance (Req = 193 Ω). The problem had a hint that said after that, I need to work backwards to find the currents. I understand that C and G will be the sum of the currents at R4 and R5, but I don't know how to find the currents at R4 and R5.
 
Physics news on Phys.org
If you know the equivalent resistance of the circuit then you can calculate the
voltage drop across R1. Then you should easily be able to calculate the currents
thru the remaining resistors.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

Equivalent resistance of a circuit
Replies
3
Views
2K
Platinum resistance thermometer and Kirchoff's Laws
Replies
1
Views
3K
Total equivalent resistance of a combined circuit
Replies
7
Views
2K
Voltage, Current, and Resistance Calculations
Replies
13
Views
2K
Resistance equivalence and circuit current
Replies
15
Views
2K
Calculate the equivalent resistance
Replies
11
Views
2K
Electric current and resistance question
Replies
2
Views
2K
Circuit analysis: Six resistors and two batteries
Replies
1
Views
2K
Find the equivalent resistance of this circuit
Replies
31
Views
4K
Non Ideal Batteries in Electric Current
Replies
5
Views
5K

Hot Threads

Recent Insights

Back
Top