Finding the equivalent resistance b/w a and b

AI Thread Summary
To find the equivalent resistance between points a and b, the discussion highlights the confusion around identifying resistors in series and parallel. The user attempted to redraw the circuit but struggled to apply the relevant equations for series and parallel resistances. They suggested that Kirchhoff's rules might be more appropriate for this problem but were unsure how to implement them. A helpful tutorial link was shared, which provided additional guidance on using Kirchhoff's laws. The conversation emphasizes the importance of correctly analyzing the circuit configuration to solve for equivalent resistance.
lgmavs41
Messages
12
Reaction score
0

Homework Statement


The problem is to find the equivalent resistance between a to b.

Homework Equations


Req in series = R1 + R2 + ... Rn
Req in parallel = inverse of sum of 1/R1 + 1/R2 + ... 1/Rn
Kirchhoff's Rules

The Attempt at a Solution


Well, I tried redrawing the circuit to figure out which resistors are in parallel and which are in series but it didn't help. The 1 ohm branches off to 9 ohms and 8 ohms; 6 ohms is connected to 8 ohms which forms a series with 3 ohms...(confuses me...). Anyway, I thought I shouldn't be using the Req equations but instead will be using Kirchhoff's rules somehow. I just don't know how to apply it here in this problem. Anyone have any suggestion as to how to start solving it? Thanks in advance

http://img504.imageshack.us/img504/792/lastproblemme5.jpg
 

Attachments

  • lastproblem.JPG
    lastproblem.JPG
    19 KB · Views: 452
Last edited by a moderator:
Physics news on Phys.org
Thanks for the link. I have some idea now on how to solve it.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top