Forced SHM with damping problem

  • Thread starter Thread starter asaspades
  • Start date Start date
  • Tags Tags
    Damping Shm
AI Thread Summary
The discussion revolves around the forced simple harmonic motion (SHM) of a mass attached to a spring, subject to damping and periodic force. The equation of motion incorporates terms for damping, spring constant, and external force, with solutions explored for both undamped and damped cases. Key findings include the derivation of complex constants for the system's response, particularly under varying conditions of damping and applied force. The relationship between the constants from the solutions is established, leading to a tangent relationship involving phase angles. The thread highlights the complexity of the problem, with participants seeking clarity on the derivations and initial conditions.
asaspades
Messages
12
Reaction score
0

Homework Statement


A mass, m, attached to a spring hangs vertically downwards under gravity. It is subject to a viscous damping force proportional to its velocity. The spring constant is k > 0.
A periodic force is applied to the spring and the equation of motion for the mass is
\ddot x+ \frac{b}{m}\dot x+\omega_0^2x=fe^{i\omega t} with b>0, m where f = |f|e^{i\phi_f} with |f| and f real constants. The applied force per unit mass should be taken to be the real part of the term on the right hand side.
(i) Explain the origin of the terms in the equation of motion of the mass.
(ii) For the case f = 0, assume a solution of the form x(t)=Ce^{i\alpha t} \text{ with } C=|C|e^{i\phi_C} where |C| and \phi_C are real constants. Find the real and imaginary parts of \alpha for the case b/2m<\omega_0.
(iii) Now consider the case with f \neq 0. Assume a solution of the form x(t) = Ae^{i\omega t} and find an expression for the complex constant A = |A|e^{i\phi_A} .
(iv) Show that the sum of the solutions from parts (ii) and (iii) above is also a solution to the equation of motion. The initial conditions are x(0) = 0 and \dot x(0) = 0. Use these to find two relations between the constants |C|, C, |A| and A. Hence show that \tan{\phi_c} = \frac{\omega}{\omega '} \tan{\phi_A} - \frac{b}{2m\omega '}, where \omega ' is the real part of \alpha from part (ii).

Homework Equations


The Attempt at a Solution


Part (i) easy

Part (ii) get \alpha = \frac{ib}{2m}\pm \sqrt{\omega_0^2 - \frac{b^2}{4m^2}}

Part (iii) get A=\frac{f}{[(\omega_0^2 - \omega^2)^2 + b^2/m^2]^{1/2}}\left(\frac{\omega_0^2 - \omega^2}{[(\omega_0^2 - \omega^2)^2 + b^2/m^2]^{1/2}} - i\frac{b\omega/m}{[(\omega_0^2 - \omega^2)^2 + b^2/m^2]^{1/2}}\right) giving \tan\phi_A = \frac{-b\omega/m}{\omega_0^2 - \omega^2}

Part (iv) Obviously a combination of the two is a solution. Using the given initial conditions x(0) = A+C = 0 \Rightarrow A=-C and \dot x(0) = i\alpha Ce^{i\alpha t} + i\omega Ae^{i\omega t} \Rightarrow \alpha e^{i\alpha t} - \omega e^{i\omega t} = 0 (not going anywhere with this part)

Since A = -C i.e. |A|e^{i\phi_A} = -|C|e^{i\phi_C} we also have |A||e^{i\phi_A}| = |C||e^{i\phi_C}| \Rightarrow |A|=|C| and \phi_A = \phi_C + \pi.

Taking \tan of both sides, \tan\phi_A = \tan\phi_B which is wrong...

This is from a past exam paper, only 1 person was able to do it in the exam. Anyone have a flash of brilliance?
 
Last edited:
Physics news on Phys.org
Anyone?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top