Height and Range of a projectile

AI Thread Summary
A projectile's angle \(\theta\) above the horizontal can be expressed as \(\theta = \tan^{-1}\left(\frac{2H}{R}\right)\), where \(H\) is the maximum height and \(R\) is the range. The initial speed \(v_0\) in terms of \(H\), \(R\), and gravitational acceleration \(g\) requires further manipulation of the equations involving trigonometric identities. The time of flight \(t\) can be derived as \(t = \frac{2\sqrt{2H}}{g}\). The discussion emphasizes the importance of using trigonometric identities to simplify the relationships between these variables. Understanding these equations is crucial for solving projectile motion problems effectively.
clarineterr
Messages
12
Reaction score
0
A projectile is fired at a speed v0 from and angle \theta above the horizontal. It has a maximum height H and a range R (on level ground)
Find:
The angle \theta above the horizontal in terms of H and R

The initial speed in terms of H, R and g

and the time of the projectile in terms of H and g.

Relevant Equations:
Hmax= \frac{\left(v0sin\theta\right)^{2}}{2g}
R = \frac{v0^{2}sin2\theta}{g}

Attempt at a solution:

From the maximum height equation: v0sin\theta=\sqrt{2gh}
and from the Range equation: v0cos\theta= \frac{gR}{2v0sin\theta}

then we have v0cos\theta= \frac{gR}{\sqrt{2gH}}

Then tan\theta= \frac{v0sin\theta}{v0cos\theta} = \frac{2H}{R}

so then \theta = tan^{-1}\frac{2H}{R}

Then for the second question, I have v0 = \sqrt{\frac{gR}{sin2\theta}}
Then I don't know how to convert it to just be in terms of g, H and R

For the third question I am getting: t = \frac{2vosin\theta}{g}
 
Physics news on Phys.org

Homework Statement



A projectile is fired at a speed v0 from and angle \theta above the horizontal. It has a maximum height H and a range R (on level ground)
Find:
The angle \theta above the horizontal in terms of H and R

The initial speed in terms of H, R and g

and the time of the projectile in terms of H and g.

Homework Equations



Hmax= \frac{\left(v0sin\theta\right)^{2}}{2g}
R = \frac{v0^{2}sin2\theta}{g}

The Attempt at a Solution



From the maximum height equation: v0sin\theta=\sqrt{2gh}
and from the Range equation: v0cos\theta= \frac{gR}{2v0sin\theta}

then we have v0cos\theta= \frac{gR}{\sqrt{2gH}}

Then tan\theta= \frac{v0sin\theta}{v0cos\theta} = \frac{2H}{R}

so then \theta = tan^{-1}\frac{2H}{R}

Then for the second question, I have v0 = \sqrt{\frac{gR}{sin2\theta}}
Then I don't know how to convert it to just be in terms of g, H and R

For the third question I am getting: t = \frac{2vosin\theta}{g}
 
You know from this equation, Hmax= \frac{\left(v0sin\theta\right)^{2}}{2g}, that

v0sin(theta) = sqrt(2Hg)

So plug sqrt(2Hg) into:

t = \frac{2vosin\theta}{g}

to get:

t = 2sqrt(2Hg)/g = 2sqrt(2H/g)
 
Welcome to PF!

Hi clarineterr! Welcome to PF! :smile:

(have a theta: θ :wink:)
clarineterr said:
Find:

The initial speed in terms of H, R and g

and the time of the projectile in terms of H and g.

Then tan\theta= \frac{v0sin\theta}{v0cos\theta} = \frac{2H}{R}

so then \theta = tan^{-1}\frac{2H}{R}

For the third question I am getting: t = \frac{2vosin\theta}{g}

Learn your trigonometric identities …

you know tanθ in terms of H R and g, so you simply need to express sin2θ and sinθ in terms of tanθ.

Hint: use sin = cos tan, and cos = 1/sec, and sec2 = tan2 + 1 :wink:
 
I got

\sqrt{\frac{gR^{2}}{4H}\left(\frac{4H^{2}}{R^{2}}+1\right)}

? I don't know if I simplified this right
 
For √(gR/sin2θ) ?

Yup, that looks good! :biggrin:

(and now how about your t = 2v0sinθ/g ? :smile:)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top