Help me read this solenoid diagram please

  • Thread starter Thread starter eberg
  • Start date Start date
  • Tags Tags
    Diagram Solenoid
AI Thread Summary
The discussion centers on understanding a solenoid diagram integrated into a switched shutoff system. The solenoid appears to be a relay with contact ratings of 30 amps for normally open contacts and 20 amps for normally closed contacts. There is uncertainty regarding whether the coil is rated at 14 volts or if that rating pertains to the contact voltage. The user seeks advice on whether they can jump two wires or add an on-off switch in line with the solenoid. Clarification on the diagram has provided the necessary information for further troubleshooting.
eberg
Messages
10
Reaction score
0
Can someone help me understand what this solenoid is doing? It's somehow integrated into a switched shutoff system. I'm trying to figure out if I can jump two wires or ultimately add an on-off switch in line somewhere between the switch and this solenoid. Thanks for any help.

click to enlarge
http://img408.imageshack.us/img408/4861/solenoid.th.jpg

-Eric
 
Last edited by a moderator:
Engineering news on Phys.org
Looks like a 14vdc relay with contact ratings of 30amp for the normally open contacts and 20amp for the normally closed. The NO contact is between 30 and 87. The NC contact is between 30 and 87a.

Edit:
On second thought, it's not clear that the coil is rated at 14volts. i.e. the 14VDC might be the contact voltage rateing. Never seen it shown like that before.
 
Last edited:
OK Thanks. That's probably all I need to know. I can usually figure out the easy ones, but couldn't quite comprehend this diagram.
 

Thread 'What happens if shielded cable has a short to the shield?'

While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
View full post »

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Noob in the field -- problems making a solenoid....
Replies
3
Views
2K
What are my option to power a pneumatic solenoid? on a timer
Replies
11
Views
3K
Minimum solenoid activation time?
Replies
8
Views
4K
Salvaged Washing Machine Motor to Power Chicken Plucker
Replies
6
Views
5K
Equation of a Magnetic Field of a Solenoid
Replies
2
Views
3K
Please help me calculate the wire temperature due to this current
Replies
22
Views
5K
Electromagnetics: Non-Symetrical coil with external iron
Replies
4
Views
3K
Assisstance with electrical diagram
Replies
3
Views
2K
Current induced in a solenoid by a constantly changing B
Replies
1
Views
2K
Drawing diagrams in physics is so difficult for me!
Replies
13
Views
3K

Hot Threads

Recent Insights

Back
Top