Help: Newton's Laws - cement bag at rest.

AI Thread Summary
A cement bag weighing 339 N is suspended from three wires, and the system is in equilibrium. The user has correctly identified T3 as 339 N and created a free-body diagram to resolve forces into their x and y components. They derived two equations for equilibrium but struggled to solve for T1 after substituting T2 into the second equation. Another participant confirmed the approach was correct and suggested rewriting the equation to isolate T1, making it solvable. The discussion emphasizes the importance of correctly applying Newton's Laws and resolving forces in equilibrium problems.
Illmatic
Messages
2
Reaction score
0
Q: A bag of cement of weight 339 N hangs from three wires as suggested in the figure below. Two of the wires make angles and with the horizontal. If the system is in equilibrium, find the tensions in the wires?

pse6e.05.18p.e.jpg


The answer requires T1, T2, T3.

I know T3 = Fgravity = 339N.

I made a free-body diagram at the knot:

http://www.njsr.org/pics/albums/userpics/fbd.GIF

Now, I can resolve the forces into their x, y components:

T1: x: -T1(cos62) y: T1(sin62)
T2: x: T2(cos25) y: T2(sin25)
T3: x: 0 y: -339N

I can make the two required equations:

(1) Fnetx = T2(cos25) - T1(cos62) = 0

(2) Fnety = T1(sin62) + T2(sin25) - 339 = 0

I can solve (1) for T2 in terms of T1:

T2 = T1(cos62/cos25)
T2 = 0.961 T1

My problem occurs here, substituting T2 into (2) to get T1:

T1(sin62) + (0.961 T1)(sin25) - 339 = 0

I do not know how to solve for T1. Could someone be of assistance, and also double check that I got everything up until the point I was stuck, correct?

Thank you!

PS. This is first-year University Physics.
 
Last edited by a moderator:
Physics news on Phys.org
Now, I haven't bothered to check your numerical values; your approach has no flaws as far as I can see.
"T1(sin62) + (0.961 T1)(sin25) - 339 = 0"
Rewrite this as:

T1(sin62 + 0.961sin25) = 339
You should be able to solve it now.
 
That helps tremendously. Thank you very much!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top