What is the current through resistor 2 in a series circuit?

  • Thread starter Thread starter alan1592
  • Start date Start date
  • Tags Tags
    Circuits Series
AI Thread Summary
In a series circuit with three resistors of 3.0 ohms each powered by a 3.0 V battery, the current through each resistor is calculated using Ohm's law. The total resistance is 9.0 ohms, not 3.0 ohms, leading to a current of 0.33 A. It is emphasized that current is measured in Amps, not Ohms. Participants confirm that the current remains the same through all resistors in a series circuit. The user is advised to create a new thread for additional questions or continue asking in the current thread.
alan1592
Messages
8
Reaction score
0

Homework Statement


First problem is a series circuit with 3 resistors. R1,R2,R3 is 3.0 ohms. This is all powered by a 3.0 V battery.

What is the current threw resistor 2?


Homework Equations


V=IR


The Attempt at a Solution



3.0=I(3.0)

Divide both sides by 3.0 and I got 1
.. the correct answer is 0.33 OHMs
 
Physics news on Phys.org
First of all, the units of current are Amps. I also believe that you misread the question. The total resistance is not 3ohms, instead EACH resistor has a resistance of 3 ohms. So you need to find the equivalent series resistance first, and then apply ohm's law and get the correct answer of 0.33A.
 
erm. . . check your solutions, current is not measured in Ohms.

First, find equivalent resistance, and remember that current thru a series of resistors is the same.
 
Ok I got the right answer. I got the total resistance and divide it by the volts and i got the current. Thanks guys! What if I have another question on this same sort of problem do i make another thread? Or should i just ask here?
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Ohm's Law - Finding Source Voltage
Replies
3
Views
1K
Finding the Current in a Resistor in a Closed Circuit
Replies
4
Views
2K
Why is it important to classify circuits as series or parallel?
Replies
5
Views
2K
Electrical Circuits - Parallel vs. Series
Replies
14
Views
1K
The equivalent resistance for the resistors in this circuit?
Replies
5
Views
2K
Finding the Current Through a Resistor (Working With Parallel and Series)
Replies
3
Views
2K
FInding current in parallel and series circuits
Replies
10
Views
3K
Voltage drop and current through each resistor
Replies
3
Views
2K
Total equivalent resistance of a combined circuit
Replies
7
Views
2K
Equivalent resistance of a circuit
Replies
3
Views
2K

Hot Threads

Recent Insights

Back
Top