How are soundwaves sent via em waves?

AI Thread Summary
Sound waves are mechanical waves that require a medium to travel, while electromagnetic (EM) waves are transverse waves that can move through a vacuum. When sound is captured by a microphone, it generates an electrical signal that can be transmitted as EM waves, not the sound itself. The frequency of the EM waves corresponds to the frequency of the sound waves, but they are distinct and not directly interchangeable. Amplitude and frequency modulation techniques are used to encode sound information into EM waves for transmission. Humans cannot hear pitches produced by visible light, as our auditory system is not sensitive to those frequencies.
jaydnul
Messages
558
Reaction score
15
When the mic hears the noise, it creates an alternating current electrical signal right? So how does that translate to em waves? Is it just that a higher frequency radio wave length would resemble a higher pitch? If so, is it impossible to hear the pitch "produced" by, say, visible light?
 
Engineering news on Phys.org
Sound waves in air are longitudinal



lwav2.gif




and electromagnetic waves are transverse.



emwavec.gif
 
Read about a Superheterodyne_receiver. BTW this is your everyday radio. It turns RF E&M waves into sound waves. Similar to what you are asking. It is a very similar process in reverse to go the other way.
 
It depends on the form of modulation. In amplitude modulation, the EM wave increases and decreases in amplitude, depending on the audio signal. So, when the audio signal reaches a high, the EM wave has a large amplitude. Likewise, when the audio is at its minimum, the amplitude of the wave is small. Frequency modulation works by increasing frequency when the audio signal is at its high, and decreasing frequency when its at its low. Wikipedia has a nice animation of such modulations: http://upload.wikimedia.org/wikipedia/commons/a/a4/Amfm3-en-de.gif
 


I can explain that soundwaves and electromagnetic waves are two different types of waves that travel through different mediums. Soundwaves are mechanical waves that require a medium, such as air or water, to travel through. They are created by vibrations and can be heard by our ears.

On the other hand, electromagnetic waves are transverse waves that can travel through vacuum, such as in space. They do not require a medium and can travel through air, water, and even solid objects. These waves are created by oscillating electric and magnetic fields.

In the case of sound being transmitted via electromagnetic waves, it is not the sound itself that is being transmitted, but rather the electrical signal that is created by the microphone. When a sound wave reaches the microphone, it causes the diaphragm to vibrate, which in turn creates an electrical signal. This signal is then amplified and transmitted through the air as electromagnetic waves.

The frequency of the electromagnetic waves is directly related to the frequency of the sound waves, but they are not interchangeable. A higher frequency electromagnetic wave does not necessarily mean a higher pitch sound, as pitch is determined by the frequency of the sound wave, not the electromagnetic wave.

It is not possible to hear the pitch produced by visible light as our ears are not sensitive to electromagnetic waves of that frequency. However, some animals, such as bats and dolphins, can use echolocation to "hear" electromagnetic waves and navigate their surroundings.

In summary, soundwaves and electromagnetic waves are two different types of waves that are created and transmitted differently. While soundwaves require a medium to travel through and can be heard by our ears, electromagnetic waves do not require a medium and are not audible to humans.
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...

Similar threads

Back
Top