How Do I Calculate the Net Force on Corner A in an Equilateral Triangle?

  • Thread starter Thread starter whyisad
  • Start date Start date
  • Tags Tags
    Assignment Forces
AI Thread Summary
To calculate the net force on corner A of an equilateral triangle with masses at each corner, first determine the gravitational force between the masses using F = G(m1*m2)/r^2. Since the triangle is equilateral, the angles between the forces acting on corner A from corners B and C are 60 degrees. Decompose these forces into their x and y components to account for direction. The net force can then be calculated by summing these components vectorially. This approach allows for an accurate determination of the net force experienced by corner A.
whyisad
Messages
2
Reaction score
0

Homework Statement


There's an equilateral triangle with three objects on every corner. Corners named A, B, and C.
The mass of each:
A - 5.5 kg
B - 7.5 kg
C- 10.0 kg

The sides of the triangles are also 5.0 cm each.

There are no other forces acting on the corners. How do I calculate the net force experienced by A due to the other two objects, on corners B and C?

Homework Equations


Fnet = MA

The Attempt at a Solution


I couldn't really figure out the question... the only things I did were:
Used Fnet=MA to convert the mass of each corner into Newtons
I also realized it was an equilateral triangle, so each corner would be 60 degrees.. and therefore, we could find the exact direction that each corner is pulling towards... not sure if its relevant. They didn't give a mass for the entire triangle either, so I don't think I can find the total mass including the objects at the corners.
 
Physics news on Phys.org
Are we talking about the force of gravity between the objects?
Or are the objects connected so there will be some tension force on one object due to the other two?
 
The forces of gravity between the objects, likely.
 
Draw the triangle first and look at it.
You should notice that point masses at either end of the base of the triangle have a force acting at 60 degrees from the top mass, and a parallel force coming from the opposing end of the base. Calculate the force of gravity between each mass, paying attention to the angle it's acting at, and split it into its components. (x)i +(y)j=Fg in vector form. Pay attention the direction and just add up the components that way. Magnitude of the vector is sqrt[(x)i^2+(y)j^2]
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top