How Do You Calculate the Altitude and Distance of Spacecraft Using Trigonometry?

  • Thread starter Thread starter mks
  • Start date Start date
  • Tags Tags
    Altitude
AI Thread Summary
The discussion focuses on calculating the altitude and distance of the International Space Station (I.S.S.) and Space Shuttle (S.S.) using trigonometric principles. Participants are asked to determine the altitudes of both vehicles, their horizontal and vertical distances apart, and their distances from tracking stations. The original poster provides a partial solution using the sine and cosine laws but expresses uncertainty about the accuracy of their calculations. A responder points out potential mistakes in rearranging equations and mixing up angles, suggesting that these errors may have led to incorrect values. The conversation highlights the importance of careful application of trigonometric laws in solving such problems.
mks
Messages
10
Reaction score
0
I know this is simple, but I need help. I've attached the image (of ISS and SS with angles, etc..)


Based upon the information provided on International Space Station (I.S.S.) and Space Shuttle (S.S.), and tracking stations C and D, answer following questions:

a) What are the altitudes of the space station and space shuttle?
b) How far apart are they? (horizontal and vertical distances)
c) How far is each space vehicle from each of the tracking stations?
 

Attachments

Physics news on Phys.org
can someone please help?

anyone..?
 
You need to show us some of your work in order for us to help you (PF homework forum rules). How would you go about starting these problems?
 
I did it this far, but I'm not sure if I even did it right:

Solution:

Laws used: Sin = Opposite / Hypotenuse, Cos = adjacent / hypotenuse and A / sina = B/ sin b = C / sin c

< A = 180 - 33 - 72
= 75

< B = 180 - 31 - 81
= 68

d --> d/sin72
= 1418/sinA
= 1418/sinA*sin72
= 1418/sin75*sin72
= 1418/0.9659*0.95105
= 1418/0.918619
= 1543.62
c --> c/sin31
= 1418/sinB
= 1418/sin31*sin68
= 1418/0.51503*0.92718
= 1418/0.4775255
= 2969.475

a1 (altitude 1) => sin33 = a1/d
a1 = sin33*d
= 0.544639*1543.62
= 840.7
a2 (altitude 2) => sin81 = a2/c
a2 = sin81*c
= 0.9877*2969.475
= 2932.5
f --> cos33 = f/d
f = cos33*d
= 0.8387*1543.54
= 1294.6
g --> cos81 = g/c
g = cos81*c
= 0.15643*2969.475
= 464.44

b) H (horizontal distance) = 1418 - f - g
= 1418 - 1294.6 - 464.52
= -341.12
V (vertical distance) = a2 - a1
= 2932.5 - 840.715
= 2091.785
 
c) Distance from ISS to Houston = d => 1543.62
Distance from SS to Houston = c => c/sin33
= 1418/sinB
= 1418/sinB*sin33
= 1418/sin68*sin33
= 1418/0.92718*0.544639
= 1418/0.504978
= 2808.04
 
I think you made a mistake when you rearranged your equations using the sine law to find d and c, giving you the wrong values to work with for the rest of the question (ex. d=(1418*sin72)/sin75). You repeat this mistake in part (c), as well as mixing up some angles I think.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top