How Do You Design a Linear Generator for High Frequency Movements?

AI Thread Summary
Designing a linear generator for high-frequency movements involves selecting appropriate coils and magnets tailored for low displacement. Key considerations include the generator's operational frequency and the magnetic field strength required for efficient energy conversion. Specific formulas can guide the selection process, focusing on coil resistance, inductance, and magnetic flux. Understanding the basic principles of linear generators is essential for effective design. Properly choosing components will ensure optimal performance for the intended application.
nijalarasan
Messages
1
Reaction score
0
Is there a clear design procedure for a linear generator. I'm in need of fabricating it for my project. what i exactly need to know is how to choose the coil and the magnets for high frequency, low displacement movements. this would help me in buying the correct coil and magnet for the same. is there any specific formula?
 
Engineering news on Phys.org
i'm going to be the first to ask? what is a linear generator?
 
nijalarasan said:
Is there a clear design procedure for a linear generator. I'm in need of fabricating it for my project. what i exactly need to know is how to choose the coil and the magnets for high frequency, low displacement movements. this would help me in buying the correct coil and magnet for the same. is there any specific formula?

thankz said:
i'm going to be the first to ask? what is a linear generator?

http://en.wikipedia.org/wiki/Electric_generator#Linear_electric_generator

.
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »

Thread 'Question about the voltage between two charged capacitors'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
View full post »

Similar threads

How are the connectors on the DC linear actuator utilized in wiring?
Replies
18
Views
2K
Role of the capacitor, coil and choke in this television receiver design
Replies
26
Views
4K
Help with LTSPICE on a high frequency circuit
Replies
4
Views
3K
Need help shrinking turbine generator coils?
Replies
6
Views
2K
Designing a 3 Phase AC Generator
Replies
3
Views
2K
Honeywell/Windtronics BTPS = linear generator?
Replies
1
Views
3K
Electric Motor for Linear Motion w/Steering Horn
Replies
8
Views
2K
How to Design a Donut Electromagnet
Replies
12
Views
4K
Low Level EMF and Helmholtz coil design
Replies
9
Views
3K
Exploring LRC AC Series Circuits
Replies
25
Views
2K

Hot Threads

Recent Insights

Back
Top