How Does Friction Affect Acceleration in a Pushed Box?

  • Thread starter Thread starter PiRho31416
  • Start date Start date
  • Tags Tags
    Force Friction
AI Thread Summary
Friction significantly impacts the acceleration of a box being pushed across a surface. In this scenario, a 2.0 kg box is pushed with a force of 5.0 N, while the friction coefficient is 0.2. The static friction force calculated is 3.924 N, leading to a net force of 1.076 N. Using Newton's second law, the resulting acceleration of the box is determined to be 0.538 m/s². The calculations and methodology used in this problem are confirmed to be correct.
PiRho31416
Messages
18
Reaction score
0
I just want to check to see if I did the problem correctly.

A person pushes a 2.0 kg box across a flat, horizontal surface with a force of 5.0 N for 4.0 m. Determine the acceleration of a box if the friction coefficient is 0.2.

Determine the acceleration of the box if the friction coefficient is 0.2.

First, we need to find the static force.
F_s= \mu F_n = (0.2) (2 \cdot 9.81) = 3.924 \ N

Then, we need to find the net force.
F_{net} = 5 \ N - 3.924 \ N = 1.076 \ N

Then, finally, the acceleration of the box is:
F=ma \Rightarrow 1.076 = (2 \ kg) \ a \Rightarrow \boxed{a=0.538 m/s^2}

Is that right? Any help is appreciated.
 
Physics news on Phys.org
The 5N force was horizontal?
Than that was just about perfect.

It is best practice to do the algebra before putting the numbers in.
So: From Newton's second law: $$F+\mu mg = ma \implies a=\frac{F+\mu mg}{m}$$... F=5N, ##\mu##=0.2, and m=2kg;$$a=0.538\text{m/s}^2$$
 
Simon,

Thanks so much! :)

Adrian
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top