How Does Thermal Expansion Cause Concrete Sidewalks to Buckle?

  • Thread starter Thread starter kamakari
  • Start date Start date
  • Tags Tags
    Thermal
AI Thread Summary
Thermal expansion causes concrete sidewalks to buckle when there is no space for the slabs to expand. In this scenario, two 3-meter slabs expand from 25 to 38 degrees Celsius, leading to upward buckling due to fixed ends. The coefficient of thermal expansion is given as 12 x 10^-6 per degree Celsius. To determine the vertical displacement, one can assume the slabs maintain their integrity and apply trigonometry to calculate how high the middle ends must raise. Understanding the relationship between temperature change and slab displacement is crucial for solving this problem.
kamakari
Messages
2
Reaction score
0
I'm a little bit confused with this question, can any1 pls help? thanks in advance

A concrete sidewalk is constructed between two buildings on a day when the temperature is 25 degree celsius. The sidewalk is consists of two slabs each 3 meters in length and of negligible thickness. As the temperature rises to 38 degree celsius, the slabs expand but no space is provided for thermal expanson. The building do not move so the slabs buckle upward. determine the vertical displacement of the slabs due to buckling effect.

a=12 x 10^-6 / celsius degree
 
Physics news on Phys.org
What part is confusing? The expansion or the buckling?
 
pretty much on how to solve the vertical displacement Y_Y
 
kamakari said:
pretty much on how to solve the vertical displacement Y_Y
Lacking further details, I would just assume that the slabs maintain their integrity as they expand. Assume the far ends don't move, then figure out how high the middle ends must raise up. Use a bit of trig to find the height.
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Thermal Expansion Concrete Problem
Replies
7
Views
6K
Calculating Expansion Cracks Width for Concrete Highway -30°C to +32°C
Replies
6
Views
2K
How Wide Should Expansion Cracks Be Between Concrete Slabs to Prevent Buckling?
Replies
1
Views
4K
Thermal Physics Expansion Coefficient Problem
Replies
13
Views
21K
What is the necessary gap width for thermal expansion of concrete sidewalks?
Replies
4
Views
10K
Why Does Concrete Contract Differently in Cold Temperatures?
Replies
2
Views
7K
Thermal Expansion, Young's Modulus
Replies
5
Views
7K
Dimension change of opening through concrete slab expansion
Replies
6
Views
2K
What is the height of the spans when they buckle due to a temperature increase?
Replies
9
Views
5K
Linear Thermal Expansion: Bridge Joints
Replies
3
Views
10K

Hot Threads

Recent Insights

Back
Top