How Much Energy Is Needed to Convert Ice at -108°C to Water Vapor at 1108°C?

  • Thread starter Thread starter zhen
  • Start date Start date
AI Thread Summary
To convert 10.0 g of ice at -108°C to water vapor at 1108°C, the total energy required is calculated using specific heats and heats of fusion and vaporization. The initial calculations yielded 50.43 kJ, which did not match any multiple-choice answers provided. Participants suggested that either the problem statement might contain errors or the calculations need re-evaluation. Despite checking the values, the original poster found no discrepancies. Ultimately, the closest correct answer chosen was in the 30 kJ range.
zhen
Messages
48
Reaction score
0
question:
How much energy in kilojoules is required to convert 10.0 g of ice at -108 to water vapor at 1108°C? Specific heats are 2.09 J/g K for both ice and water vapor, and 4.18 J/g K for liquid water. Heats of vaporization and fusion are 2260 and 335 J/g.

This is what I did:
10g*108C*2.09J/g K + 10g * 335J/g + 10g*100C * 4.18 J/g K + 10g * 2260 J/g + 1008C * 10g * 2.09 J/g K= 50434.4 J =50.43 kJ

This question is a multiple choice, and there is no such choice, so this answer must be wrong. Unfortunately, I really don't know what is wrong with that.

I only the total energy is equal to the heat required to change the -108c ice to 0 C; then plus the energy require to melt the ice and then so far and so on...
 
Physics news on Phys.org
Well, i find your answers convincing though I have not claculated exactly. yo have missed no equation.
 
vaishakh said:
Well, i find your answers convincing though I have not claculated exactly. yo have missed no equation.
I don't think I missed any equation,(maybe there are, but I really can not think of one), and there is no mistake in the calculation.
 
zhen said:
question:
(snip)2.09 J/g K for both ice and water vapor, (snip)

You'll want to "check" this value. Either the problem statement included incorrect information, or you've misread something somewhere.
 
Bystander said:
You'll want to "check" this value. Either the problem statement included incorrect information, or you've misread something somewhere.
i check it, there is nothing wrong.
so... i think there is something wrong in the question.
I choose the closest answer which is 30 somthing, and that is correct...
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top