How Quickly Does an Ideal Gas Expand with Temperature Change?

AI Thread Summary
The discussion centers on the expansion rate of an ideal gas when subjected to a temperature change, specifically from 30 degrees to 50 degrees Celsius. The ideal gas law, expressed as PV = nRT, is fundamental in understanding this process, where P is pressure, V is volume, T is temperature in Kelvin, n is the number of moles, and R is the universal gas constant. It is noted that the expansion occurs gradually as the temperature increases, rather than instantaneously. While the ideal gas law applies to static systems, the rate of expansion can be described by the derivative dV/dT = nR/P, indicating that if pressure and the amount of gas remain constant, the volume will change proportionally with temperature. This aligns with Guy-Lussac's law, which states that volume is directly proportional to temperature under constant pressure, reinforcing that a doubling of temperature results in a doubling of volume.
daniel3777
Messages
5
Reaction score
0
can anyone give me an equation for the rate that an ideal gas expands in a temperature change. like when a gas goes from 30 degrees to 50 degrees in a baloon. how quickly would it expand?
 
Chemistry news on Phys.org
you need to use the ideal gas law to figure it out.
Let P be the pressure of a gas, V the volume it occupies, and T its temperature (which must be in absolute temperature units, i.e., in Kelvin). Then the ideal gas law states

PV = nRT


where n is the number of moles of gas present and R is the universal gas constant, or equivalently


it would expand to the new volume as the gas temperature inccreases, there isn't a real amount of time it takes to expand, it just expands as the temperature increases. if the temperature were to suddenly increase by 20 degrees, then the gas would suddenly expand to the the new volume, but normaly it would be a gradual process because the temperture increasing is a gradual process.
 
Well, the ideal gas law is only valid for static systems, right? So I guess the answer would be that it would take as long as was needed for the system to re-equilibrate at the new parameters.
 
Maybe you can try to use diffusion alternative... Diffusion rate changes in an indirectly proportional way with the molecular mass.
 
It seems to me that you would have to take the partial derivative of Volume with respect to T so you would get dV/DT=nR/P. So if pressure and amount of gas is held constant, the rate at which it expands is constant.
 
Last edited:
This is basically the same thing that Guy-Lussac's law says. V=kT where k is some constant. So for example, if T doubles then volume will double (only if pressure and the amount of gas is held constant). Writing dV/dT=nR/P is just a more "sophisticated" way of stating the same thing.
 
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
It seems like a simple enough question: what is the solubility of epsom salt in water at 20°C? A graph or table showing how it varies with temperature would be a bonus. But upon searching the internet I have been unable to determine this with confidence. Wikipedia gives the value of 113g/100ml. But other sources disagree and I can't find a definitive source for the information. I even asked chatgpt but it couldn't be sure either. I thought, naively, that this would be easy to look up without...
Back
Top