How to Apply a Non-Uniform Sinusoidal Load on a Cylinder in ANSYS?

AI Thread Summary
To apply a non-uniform sinusoidal load on a cylinder in ANSYS, users can utilize APDL (ANSYS Parametric Design Language) to define the load based on node or element coordinates. APDL allows for batch scripting, enabling the definition of custom load functions such as sin(x). Detailed documentation is available to assist in understanding the implementation process. Users can also request sample APDL files for practical guidance. The discussion emphasizes the need for applying consistent loads across coordinates on the cylinder.
elena
Messages
5
Reaction score
0
How can I set a non uniform load (for example sin(x)) in on a cylinder ring?
 
Engineering news on Phys.org
Apdl

Hello elena,

you may get the coordinate of the node/element by apdl and define any function for the load also using apdl. Apdl is some kind of batch/script programming implemented within Ansys. You might inspect the detailled documentation/help for more informations. You also can send me a pm for a sample apdl-file.
 
Thanks so much and sorry that i was late to thank you!
 
I'm also studing same problem. I have a cylinder. I want to apply a non uniform load. I can apply one coordınate. I want to apply same load as parallel . Can you help me? How can I set load (depends on only x coordinate) in on a cylinder
 

Thread '2:1 Pulley Question'

I have Mass A being pulled vertically. I have Mass B on an incline that is pulling Mass A. There is a 2:1 pulley between them. The math I'm using is: FA = MA / 2 = ? t-force MB * SIN(of the incline degree) = ? If MB is greater then FA, it pulls FA up as MB moves down the incline. BUT... If I reverse the 2:1 pulley. Then the math changes to... FA = MA * 2 = ? t-force MB * SIN(of the incline degree) = ? If FA is greater then MB, it pulls MB up the incline as FA moves down. It's confusing...
View full post »

Thread 'Why do all my clocks run slow?'

Hi. I noticed that all electronic devices in my household that also tell time eventually lag behind, except the ones that get synchronized by radio signal or internet. Most of them are battery-powered, except my alarm clock (which runs slow as well). Why does none of them run too fast? Deliberate design (why)? Wrong temperature for quartz crystal? Decreasing battery voltage? Or just a coincidence?
View full post »

Similar threads

Allowable uniform loads - W beams vs. LVL
Replies
2
Views
4K
Ansys workbench Composite Analysis
Replies
22
Views
12K
Design -- horizontal I-beam with center loading....
Replies
6
Views
2K
ANSYS - Radiation of a satellite - Surface-to-surface or to-ambient
Replies
1
Views
2K
"ANSYS Workbench" Contact tool results plotting vs length?
Replies
1
Views
3K
I Help with FLP argument of non-uniformly distributed surface charges
Replies
2
Views
1K
Jackhammer on Vehicle Suspension, Unsprung Mass, Tire patch load
Replies
13
Views
3K
Engineering Bending Moment for Simply Supported, Overhanging Beam with two Overhangs
Replies
4
Views
3K
Uniform Continuity of functions
Replies
40
Views
4K
Radial contraction of a stretched hyperelastic cylinder
Replies
5
Views
2K

Hot Threads

Recent Insights

Back
Top