How to Calculate Time for One Revolution of an Ion in a Magnetic Field?

  • Thread starter Thread starter Invisible101
  • Start date Start date
  • Tags Tags
    Homework
AI Thread Summary
To calculate the time for one revolution of an ion in a magnetic field, the circumference of the circular path is essential, which is derived from the radius. The charge-to-mass ratio and magnetic field strength are used to determine the ion's speed, calculated as v = (q/m) * B * R. The circumference is then calculated using C = π * d, where d is the diameter of the circle. The time for one revolution is found by dividing the circumference by the speed, resulting in t = C/v. There is a noted discrepancy in the radius used for calculations, highlighting the importance of consistency in values.
Invisible101
Messages
2
Reaction score
0
Hi, I need help with this question:

An ion with a charge-to-mass ratio of 1.10 x 10^4 C/kg travels perpendicular to a magnetic field (B = 9.10 x 10^-1 T) in a circular path (R = 0.240 m). How long does it take the ion to travel one revolution?

I've found the speed that it travels...then what? How would I find the distance that it travelled? Do I use the circumference? :confused:

I've decided...instead of posting a thread everytime I need help, I'm just going to have one thread and this is where I'll post my questions.
 
Physics news on Phys.org
If the ion travels in a circular path then the distance it travels in one revolution must be the circumference of the circle.
 
This is what I did:

q/m = vB┴r
(1.10 x 10^4 C/kg)(9.10 x 10^-1 T)(0.420 m) = v
v = 2402.4 m/s

C = (pie)d (I don't know how to make the symbol)
C = (pie)(0.480 m)
C = 1.507...m

t = d/ = 1.507...m/2402.4 m/s = 6.28 x 10^-4 s

Is this right?
 
I think you switched digits in R. You stated originally that R = 0.24 m but you seem to be using R = 0.42 in your calculation.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top