Hydrostatic Force & It's Location on a Plate

AI Thread Summary
To calculate the hydrostatic force on a submerged plate, one must consider the depth of the water and the area of the plate. The force can be determined using the formula: F = ρghA, where ρ is the water density, g is the acceleration due to gravity, h is the depth of the centroid of the plate, and A is the area. The location of the hydrostatic force acts at the centroid of the submerged area, which is crucial for stability analysis. The discussion also touches on technical issues regarding image uploads and HTML code usage for sharing drawings. Understanding these calculations is essential for engineering applications involving submerged surfaces.
SheCanBuild
Messages
9
Reaction score
0
Please explain how I calc the hydrostatic force and it's location on the plate.


Above the drawing is says:
A 10m equlateral plate under water
Assume 60 degrees F

I clicked on 'Manage Attatchments' to upload the drawing. Give me a minute to do it another way if it won't show up.
Thanks,
RonelleNote: I couldn't use AutoCAD to draw it because it wouldn't show up on the boards, so I had to use a paint program so please excuse the unaligned flubs and stuff...I doubt my 50 degree is 50 degrees either
 
Physics news on Phys.org
How do i use html? just past the code or do i need to be in a different mode? http://img.villagephotos.com/p/2004-10/844417/Image2.jpg
lol we'll see

Fixed your link, SheCanBuild

-enigma
 
Last edited by a moderator:
Thankyou enigma
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top