Incline plane, two masses, a pulley

AI Thread Summary
The discussion revolves around a physics problem involving two masses connected by a string over an ideal pulley, with one mass on an inclined plane and the other hanging. The goal is to determine the angle theta that allows the mass on the incline to move at a constant speed. The user sets up the equations of motion for both masses, considering forces such as gravity, tension, and friction. They express uncertainty about the direction of movement and whether their setup is correct, ultimately leading to a derived equation involving theta and the coefficient of friction. The user concludes that they believe they have correctly set up the problem but are struggling to solve for theta.
jimz
Messages
12
Reaction score
0

Homework Statement


A string through an ideal pulley connects two blocks, one (mass=2m) is on an inclined plane with angle theta to horizontal and coefficient of kinetic friction mu. The other block (mass=m) hangs off the pulley on the high side of the inclined plane.

(looks like this, except no acceleration and the block on the plane is twice the mass of the hanging block:
http://session.masteringphysics.com/problemAsset/1010976/24/MLD_2l_2_v2_2_a.jpg)

Find the angle theta that allows the mass to move at a constant speed.

Homework Equations


First, I'm not even sure which direction the blocks will move, and I'm not going to figure it out but I suspect they can move at a constant velocity either way if we vary theta and mu. For now I'll assume that the 2m mass will move down the plane towards the earth. If that's wrong a the friction sign will be changed but the same idea here.

for the 2m mass, with +x along the plane pointing down, and y perpendicular pointing up :

\sum F_{2mx}=F_{gravityx}-F_{frictionx}-T
\sum F_{2mx}=2mg sin \theta-(\mu)(2mg cos \theta)-T

\sum F_{2my}=N-F_{gravityy}
\sum F_{2my}=N-2mg cos \theta

for the m mass, with +y in the up direction:
\sum F_{my}= T-F_{gravity}
\sum F_{my}= T-mg

The Attempt at a Solution


At a constant velocity, neither block is accelerating, so a=0

I believe all I need to do is focus on one mass, I'll try block on the plane (mass=2m) with the x direction along the inclined plane.
\sum F_{2mx}=2mg sin \theta-(\mu)(2mg cos \theta)-T=2m\ddot{x}=0

Can I then assume T=mg from the hanging mass with no acceleration?

2mg sin \theta-(\mu)(2mg cos \theta)-mg=2m\ddot{x}=0
mg(2sin \theta-(\mu)(2cos \theta)-1)=0
sin \theta-(\mu)(cos \theta)-\frac{1}{2}=0
-(\mu)(cos \theta)=\frac{1}{2}-sin \thetaAnd then I'm kind of stuck and unsure I even set it up right.

Thanks!
 
Last edited:
Physics news on Phys.org
Is this your homework?
 
yes, it's a problem from our book. Does that matter?

I now think I set it up correctly and it's now just a math problem but I still can't get anywhere closer to the solution for theta.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top