Is Meshless Modeling Truly Meshless or Just a Simplified Mesh?

  • Thread starter Thread starter meandcfd
  • Start date Start date
  • Tags Tags
    Modeling
AI Thread Summary
The discussion centers on the concept of meshless modeling in engineering simulations, questioning whether it is genuinely meshless or merely a simplified version of traditional mesh methods. Participants express curiosity about the true nature of meshless techniques, with some suggesting that certain tools, like Ansys Discovery Live, may still rely on underlying mesh structures. Links to various meshless modeling resources are shared, indicating a desire for deeper understanding. The conversation highlights the ambiguity surrounding the term "meshless" and its implications for simulation accuracy and flexibility. Overall, the debate emphasizes the need for clarity in distinguishing between true meshless methods and those that utilize simplified mesh approaches.
meandcfd
Messages
4
Reaction score
0
TL;DR Summary
Looking for insight on meshless FEA
Anybody have experience with it? Is it really meshless or just hiding a mesh generation?
 
Engineering news on Phys.org

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

[ANSYS] Meshing based on Keypoints
Replies
0
Views
1K
The stiffness of an FEA model depends on the mesh resolution?
Replies
29
Views
3K
3D Printing and "Watertight" Digital Models
Replies
10
Views
2K
Curved Mesh on Symmetry Boundary in ANSYS Maxwell 3D
Replies
2
Views
3K
Problem with the friction model in an Abaqus simulation
Replies
6
Views
4K
Air Friction energy loss on a trampoline
Replies
13
Views
2K
I I need to simulate clothing meshes for hanging garments
Replies
3
Views
102
Mesh Tally in MCNPX for Dose Calculation / How to Add & Visualize?
Replies
0
Views
271
Structural Member Undergoing Pure Bending: Detached Mesh Regions
Replies
24
Views
3K
ANSYS Workbench solution problem
Replies
1
Views
10K

Hot Threads

Recent Insights

Back
Top