Kinematics police car chase question

  • Thread starter Thread starter spizma
  • Start date Start date
  • Tags Tags
    Car Kinematics
AI Thread Summary
The problem involves a police car that begins accelerating one second after a speeder passes it. The speeder travels at 100 km/h (27.78 m/s), while the police car starts at 80 km/h (22.23 m/s) and accelerates at 2 m/s². After one second, the speeder is 5.55 meters ahead. The correct equation to find the time until the police car catches up is 5.55 + 27.78t = 22.23t + 1t². The calculations confirm that the police car catches the speeder in approximately 6.42 seconds, not the 7.4 seconds stated in the book.
spizma
Messages
34
Reaction score
0

Homework Statement


A speeder passes with velocity 100 km/h by a police car with velocity 80km/h. Exactly one second after the speeder passes the police car, the police car accelerates with an acceleration of 2 m/s^2. How long is it until the police car passes the speeder.

Homework Equations


x = x_0 + v_0 + \frac{1}{2} a t^2

100 km/h = 27.78 m/s
80 km/h = 22.23 m/s

The Attempt at a Solution


I figured out that in the one second before the police car accelerated, the speeder got 5.55 m ahead. I then figured that the distance traveled by the police car from the time it starts accelerating to the time it catches up with the speeder (t) is 5.58 m + (27.78 m/s)*t (the distance between the cars at first, and the distance traveled by the speeder in the time it takes for the police to catch up).

So the equation should be this, right?
5.55 + 27.78 t = 22.23 t + \frac{1}{2} 2 t^2

When I try to solve for that I get t = -.87 s and 6.42 s, but the back of the book says it is 7.4 seconds. What am I doing wrong? Thanks much in advance.
 
Last edited:
Physics news on Phys.org
Your calculation is correct. 6.42 sec is the right answer. 7.4 sec will be the solution if t=0 is the instant when speeder passes by the police car.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top