Lab - Friction and Forces on an Incline

AI Thread Summary
To calculate the coefficient of sliding friction (μk), the average force of sliding friction (0.32N) should be divided by the normal force (Fn), which is derived from the weight and angle of the incline. The correct formula is μk = Ff/Fn, where Ff is the force of friction. The normal force can be expressed as Fn = mg cos(θ), where θ is the angle of the incline. The discussion clarifies that the average force of friction should not be treated as an angle, and the relationship between the forces acting on the object must be considered. Understanding these relationships is crucial for accurately determining the coefficient of sliding friction.
soccergirl14
Messages
11
Reaction score
0
Okay, so I am writing a lab but I am quite stuck on one question.

Using the average force of sliding friction from the data, calculate the coefficient of sliding friction.
Average force of sliding friction: 0.32N

The equation I used to calculate other static/sliding coefficients was:
(FgSinX)/(FgCosX)
And X is the value of an angle.

I am confused because I don't know if I can use this formula to calculate the coefficient because the average force of sliding friction is not an angle.

If I use the average force of sliding friction as an angle I get:
(9.8xSin0.32)/(9.8xcos0.32) = 0.006
This does not seem right, anyone have any ideas?
please and thanks.
 
Physics news on Phys.org
soccergirl14 said:
Okay, so I am writing a lab but I am quite stuck on one question.

Using the average force of sliding friction from the data, calculate the coefficient of sliding friction.
Average force of sliding friction: 0.32N

The equation I used to calculate other static/sliding coefficients was:
(FgSinX)/(FgCosX)
And X is the value of an angle.

I am confused because I don't know if I can use this formula to calculate the coefficient because the average force of sliding friction is not an angle.

If I use the average force of sliding friction as an angle I get:
(9.8xSin0.32)/(9.8xcos0.32) = 0.006
This does not seem right, anyone have any ideas?
please and thanks.

Don't you want to look to the definition of μk?

μk = Ff/Fn

If you have determined Ff, then aren't you just interested in dividing by the Fn ?
 
Okay, thank you, I think I understand.
What I tried was:
(0.32N)/(9.8cosX)
Would that make sense?
 
soccergirl14 said:
Okay, thank you, I think I understand.
What I tried was:
(0.32N)/(9.8cosX)
Would that make sense?

Not quite.

The normal force is given by cosθ * weight, but there is also the component of gravity down the incline of sinθ * weight. If the force you are measuring pushing up the ramp is .32N then isn't that the result of the relationship that

.32 N = μ*m*g*cosθ + m*g*sinθ

If .32N is measured pushing down the ramp then

.32N = μ*m*g*cosθ - m*g*sinθ
 
Okay I get it!
thank you so much for the help!
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Having a hard time learning Newton's 2nd law
Replies
5
Views
2K
Static equilibrium | Uniform sphere on incline | Determining friction
Replies
43
Views
2K
Does coefficient of kinetic friction depend on speed?
Replies
16
Views
5K
Static friction coefficient for a crate in the back of a truck
Replies
6
Views
2K
A problem from a physics national competition
Replies
13
Views
1K
Determining the angle while dealing with friction on an inclined plane
Replies
8
Views
3K
Push/Pull Force of wheeled cart on an incline
Replies
7
Views
4K
Minimum force required to prevent sliding down
Replies
1
Views
3K
Why is the direction of kinetic/static friction up a ramp?
Replies
7
Views
1K
Variable friction on an inclined plane and maximum velocity
Replies
33
Views
3K

Hot Threads

Recent Insights

Back
Top