Maximize Battery Lifetime: Drawing a Circuit

  • Thread starter Thread starter physicsstudent14
  • Start date Start date
  • Tags Tags
    Battery Lifetime
AI Thread Summary
To maximize battery lifetime with two identical bulbs, the circuit should be arranged in series rather than parallel. A series configuration results in higher resistance and lower current, which reduces power consumption according to the formula P = IV. Since the battery's voltage is fixed, minimizing current is essential for extending battery life. In contrast, a parallel arrangement would draw more current due to lower resistance, leading to quicker battery depletion. Therefore, using the bulbs in series is the optimal solution for maximizing battery longevity.
physicsstudent14
Messages
11
Reaction score
0

Homework Statement



Draw a circuit the involves a battery and two identical bulbs that will maximize the lifetime of the battery. More specifically, draw a circuit that allows you to run the lights longest


Homework Equations


P = IV
V = IR
Series: R = R1 + R2
Parallel: R = 1/(1/R1 + 1/R2)


The Attempt at a Solution



I know that the equivalent resistance of the light bulbs in series is greater than the equivalent resistance in parallel. I also know that the battery provides a fixed emf. In series, there is a smaller current and a larger resistance than in parallel. I think that because parallel circuits have less resistance, if I put the light bulbs in parallel, then the battery life will be maximized. Does this make sense, or am I woefully lost in circuits? Thank you so much.
 
Physics news on Phys.org
physicsstudent14 said:

Homework Statement



Draw a circuit the involves a battery and two identical bulbs that will maximize the lifetime of the battery. More specifically, draw a circuit that allows you to run the lights longest


Homework Equations


P = IV
V = IR
Series: R = R1 + R2
Parallel: R = 1/(1/R1 + 1/R2)


The Attempt at a Solution



I know that the equivalent resistance of the light bulbs in series is greater than the equivalent resistance in parallel. I also know that the battery provides a fixed emf. In series, there is a smaller current and a larger resistance than in parallel. I think that because parallel circuits have less resistance, if I put the light bulbs in parallel, then the battery life will be maximized. Does this make sense, or am I woefully lost in circuits? Thank you so much.

The voltage is a constant determined by the battery. The battery lasts the longest when there is the least amount of power getting used. Since P=IV and the voltage drop across the entire circuit is a constant determined by the battery, then the current is the only factor left. Is the current high when there is a large or small resistance?
 
If you put the bulbs in parallel, will they draw more current or less current?

If the bulbs draw more current, will the battery be able to supply energy for a greater or lesser period of time?

(Hint: You want to minimize the rate of energy dissipation from the battery.)

EDIT: NotMrX has said basically the same things, a few minutes before me.
 
Because V = IR, and I = V/R, then the larger current will coincide with the smaller resistance (parallel circuit). If the parallel circuit has a small resistance and larger current, then it will use up more power, so the series circuit maximizes battery life, right? Thanks.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top