Need help going over a momentum/spring problem

  • Thread starter Thread starter groundhog92
  • Start date Start date
AI Thread Summary
A pellet gun fires a bullet into a block of wood attached to a spring, resulting in simple harmonic motion with an amplitude of 11 cm. The bullet's initial speed is 650 m/s, and calculations show the spring constant is approximately 349.9 N/m. The total energy of the system after the collision is calculated to be 4.23 J, considering the maximum kinetic and potential energy. The maximum acceleration of the bullet/block system is determined to be 15.4 m/s². The velocity of the bullet/block reaches zero at the maximum displacement of ±11 cm.
groundhog92
Messages
7
Reaction score
0
1.Homework Statement
A pellet gun is fired into a block of wood that is attached to a spring on a frictionless surface. The bullet remains in the wood and the block of wood and the bullet enter into a simple harmonic motion with Amplitude=11cm. The 5g bullet was traveling at 650m/s before hitting the 2.5kg block of wood.
a)What is the spring constant?
b)What is the the total energy of the system after the collision?
c)What is the max acceleration of the bullet/block once it begins its oscillation?
d)Where will the bullet/block reach a velocity of 0?


Homework Equations


mv=mv
(1/2)mv^2=(1/2)kx^2
a=(V^2)/A
v=2pief(sqrt(A^2-x^2))



The Attempt at a Solution


I've already done the problem I just need someone to check my work because I'm not completely sure about the process.

Part a
(.005)(650)=(2.505)v
v=1.3m/s

(1/2)k(.11^2)=(1/2)(2.505)(1.3^2)
k=349.9N/m

Part b
E=(1/2)mv^2 + (1/2)kx^2
E=((2.505)(1.3^2)+(349.9)(.11^2))/2
E=4.23J

Part c
a=(v^2)/A
a=(1.3^2)/.11
a=15.4m/s^2

Part d
Where A=x
so where x=+-11cm

Thanks in advance for any help.
 
Physics news on Phys.org
In part b) you have added the max KE to the max PE.
When KE is max, PE is zero and vice versa.
 
So the total energy of the system would be equal to just the max potential or kinetic by themselves?
 
Yep!
 
alright thanks
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top