Newbie here with intro thermodynamics question

AI Thread Summary
To estimate the average temperature of the air inside a hot air balloon, start by determining the mass of the air based on the balloon's volume and the density of air, which is approximately 1.225 kg/m³ at sea level. The mass of the air inside the balloon can be calculated by subtracting the mass of the balloon and payload (500 kg) from the total mass of the displaced air. This principle is similar to how submarines adjust their buoyancy by changing the mass of water and air in their ballast tanks. Once the mass of the air is known, the average temperature can be derived using the ideal gas law, considering the pressure and volume of the air. Understanding these concepts is crucial for solving thermodynamics problems related to buoyancy and gas behavior.
diewlasing
Messages
14
Reaction score
0
keep in mind this problem is on page 8 of my text (yes I'm already confused by the problem) and the ideal gas law was just introduced.

problem: Estimate the average temperature of the air inside a hot air balloon. Assume that the total mass of the unfilled balloon and payload is 500kg. What is the mass of the air inside the balloon?

That's all that's given. Thanks in advance.
 
Physics news on Phys.org
Well...how do you find the mass of any volume of air?
 
I know how to do that, the density is 1000 kg/m^3 and you set it equal to m/v where v is the volume given. But I still don't see how that helps me much.
 
Since the mass of the baloon and payload is known then the mass of the air inside it must be equal to the mass of the air it displaces minus the mass of the baloon and payload. This is the same principle that let's a submarine maintain its depth. Compress the air from the balast tanks and let water in in its place and the sub goes lower. reverse the process and replace the water in the balast tanks with air and the sub rises. A hot air baloon works on the same principle of equilibrium. It just uses air with different temperatures instead of the water/air combo.

Start with an arbitrary figure for the total volume of the baloon and payload with the baloon inflated and figure the mass of free air at a particular altitude (barometric pressure) and temperature. Be as realistic as you can in the displacement volume figure. Then use that volume and its mass and subtract the mass of the baloon and payload from the total mass of the free air in the baloon if it were not heated. This will give you the mass of the air in the baloon needed to bring the total displacement mass of the baloon, payload, and hot air to the equilibrium point. This is the figure needed for the baloon to maintain its altitude. If you need to figure average temperature at this point you just figure it out from the gas laws you should already know.

Here are some links to use.

http://imagine.gsfc.nasa.gov/docs/ask_astro/answers/970106a.html

http://science.howstuffworks.com/hot-air-balloon.htm

http://van.physics.uiuc.edu/qa/listing.php?id=2122

http://www.Newton.dep.anl.gov/askasci/phy00/phy00435.htm
 
Last edited:
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top