Parallel vs. Series Resistors: Solving for Unknown Voltage and Current

  • Thread starter Thread starter BuBbLeS01
  • Start date Start date
  • Tags Tags
    Parallel Series
AI Thread Summary
When two resistors are connected in parallel, the total current is the sum of the individual currents, which in this case is 7.3 A (4.3 A + 3 A). In a series connection, the current remains constant across all resistors. Therefore, if the same resistors are connected in series, the total current supplied by the battery will also be 7.3 A. Understanding the difference between series and parallel connections is crucial for solving circuit problems. The key takeaway is that current behaves differently in series and parallel configurations.
BuBbLeS01
Messages
602
Reaction score
0
Parallel vs. Series...HELP!

Homework Statement


When two resistors are connected in parallel across a battery of unknown voltage, one resistor carries a current of 4.3 A while the second carries a current of 3 A. What current will be supplied bu the same battery if these two resistors are connected to it in series?


Homework Equations





The Attempt at a Solution


I need help getting started...
 
Physics news on Phys.org
In series the amps are the same throughout every resistor. In parallel the amps all add up to a total amperage. I'm pretty sure I know how to do it..see if you can figure out the rest.
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Why Do Capacitors Behave Differently in Series and Parallel Configurations?
Replies
20
Views
2K
Calculating the voltage across capacitors and resistors with switches
Replies
2
Views
738
Finding the Current Through a Resistor (Working With Parallel and Series)
Replies
3
Views
1K
Electrical Circuits - Parallel vs. Series
Replies
14
Views
1K
Batteries in series, parallel, and internal resistance
Replies
24
Views
5K
Finding the Current in a Resistor in a Closed Circuit
Replies
4
Views
2K
Equivalent resistance of a circuit
Replies
3
Views
2K
RC Circuit with parallel resistor
Replies
6
Views
3K
Reducing all circuit resistors to only parallel and series?
Replies
2
Views
2K
Finding the Optimal Combination of Resistors for a Desired Total Resistance
Replies
9
Views
2K

Hot Threads

Recent Insights

Back
Top