Calculating Forces on a Uniform Platform in Equilibrium: Physics Problem

AI Thread Summary
To solve for the forces exerted on a uniform platform in equilibrium, moments can be summed about the right end to isolate the left post's force. The equation -0.3 * 75g - 1 * 20g + Fleft * 2 = 0 allows for the calculation of Fleft. Subsequently, summing vertical forces gives Fleft + Fright - 20g - 75g = 0, enabling the determination of Fright. It's important to verify results by checking calculations against both the moment and force equations to ensure consistency. The final values for the forces should be expressed in terms of g or as numerical values in Newtons.
key
Messages
16
Reaction score
0
a person stands a distance of 0.300 meters from the right end of a 2.00 meter long uniform platform that is supported by two posts, one at each end. The board has a mass of 20.0 kg and the person's mass is 75.0 kg.

a. determine the force exterted on the board by the post on the left end.

b. determine the force exerted on the board by the post on the right end.



Sum moments about any point. I will choose the Right end.

-.3*75g -1*20g+Fleft*2=0

That gives you Fleft end.

Now, sum forces vertically
Fleft+Fright-20g-75g=0
solve for fright.

i don't think I'm doing it right
can someone help
 
Physics news on Phys.org
Hi key, well I think you simply over complicated things actually, have a look back at you first equation, isn't that already solvable, you did exactly the right thing by taking moments about the right post you eliminated the right reactive force from you equations leaving you with a single variable :D which is solvable on its own, and repeat to find the right hand force, hope that helps :D
 
As Galadirith has noted, you can sum moments about the left post to solve for F-right, and then this serves as a check for your value you obtained for F_right when you summed forces in the y direction, which is also correct. It's good to have a backup equation for a check; if the value obtained for F_right is different when using the sum of moment equation than it is when using the sum of forces equation, you made an error somewhere.
 
I got 21.25 for F left and -73.75 for F right.
Is that right?
 
Hi key, well i think you are basically there but a couple of things to say. Firstly the value reactive force at the right post you gave that as -73.75, i would suggest have a look at that again, and think does it seem logical that the reactive force is negative? Also you have given numerical values in terms of g, basically in you original equations you correctly set up the equation for moment about the right post, with their forces expressed in terms of their respective masses and the acceleration due to gravity represented by g.

In order for you final values of the forces to be correct it would either be 21.25g N or 208.25 N, hopefully you can see why and verify that for yourself, the same also applies to the right post. :D
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top