How Does Friction Affect Acceleration in a Pushed Box?

  • Thread starter Thread starter PiRho31416
  • Start date Start date
  • Tags Tags
    Force Friction
AI Thread Summary
Friction significantly impacts the acceleration of a box being pushed across a surface. In this scenario, a 2.0 kg box is pushed with a force of 5.0 N, while the friction coefficient is 0.2. The static friction force calculated is 3.924 N, leading to a net force of 1.076 N. Using Newton's second law, the resulting acceleration of the box is determined to be 0.538 m/s². The calculations and methodology used in this problem are confirmed to be correct.
PiRho31416
Messages
18
Reaction score
0
I just want to check to see if I did the problem correctly.

A person pushes a 2.0 kg box across a flat, horizontal surface with a force of 5.0 N for 4.0 m. Determine the acceleration of a box if the friction coefficient is 0.2.

Determine the acceleration of the box if the friction coefficient is 0.2.

First, we need to find the static force.
F_s= \mu F_n = (0.2) (2 \cdot 9.81) = 3.924 \ N

Then, we need to find the net force.
F_{net} = 5 \ N - 3.924 \ N = 1.076 \ N

Then, finally, the acceleration of the box is:
F=ma \Rightarrow 1.076 = (2 \ kg) \ a \Rightarrow \boxed{a=0.538 m/s^2}

Is that right? Any help is appreciated.
 
Physics news on Phys.org
The 5N force was horizontal?
Than that was just about perfect.

It is best practice to do the algebra before putting the numbers in.
So: From Newton's second law: $$F+\mu mg = ma \implies a=\frac{F+\mu mg}{m}$$... F=5N, ##\mu##=0.2, and m=2kg;$$a=0.538\text{m/s}^2$$
 
Simon,

Thanks so much! :)

Adrian
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top