Range of Water Flow with 2bar and 45° Angle

AI Thread Summary
To calculate the range of water flow at a pressure of 2 bar and a 45-degree angle, the discussion focuses on determining how far the water will travel. The pipe diameter is specified as 1.5 inches. The term "range of water" refers to the distance the water will reach, which can be modeled as a parabolic trajectory. The calculations involve fluid dynamics principles to estimate the parabolic range based on the given parameters. Understanding these factors is essential for accurate predictions of water flow distance.
Md. Shafieur
Messages
2
Reaction score
0
hlw,
this is Shafieur...i m in a problem to calculate the range of water with pressure 2bar and angle 45 degree. pipe dia is 1.5 inch...
 
Physics news on Phys.org
What do you mean by "range of water"?
 
i mean that how long the water will go... what would be the parabolic range of the water...
 

Thread '1:1 versus 2:1 Mechanical Advantage debate'

The rope is tied into the person (the load of 200 pounds) and the rope goes up from the person to a fixed pulley and back down to his hands. He hauls the rope to suspend himself in the air. What is the mechanical advantage of the system? The person will indeed only have to lift half of his body weight (roughly 100 pounds) because he now lessened the load by that same amount. This APPEARS to be a 2:1 because he can hold himself with half the force, but my question is: is that mechanical...
View full post »

Thread 'Average velocity as a weighted mean'

Hello everyone, Consider the problem in which a car is told to travel at 30 km/h for L kilometers and then at 60 km/h for another L kilometers. Next, you are asked to determine the average speed. My question is: although we know that the average speed in this case is the harmonic mean of the two speeds, is it also possible to state that the average speed over this 2L-kilometer stretch can be obtained as a weighted average of the two speeds? Best regards, DaTario
View full post »

Thread 'Newton's first law?'

Some physics textbook writer told me that Newton's first law applies only on bodies that feel no interactions at all. He said that if a body is on rest or moves in constant velocity, there is no external force acting on it. But I have heard another form of the law that says the net force acting on a body must be zero. This means there is interactions involved after all. So which one is correct?
View full post »

Similar threads

Microfluidics in pressures lower than one atmosphere
Replies
5
Views
2K
I Issue calculating water pressure due to the constriction of water flow
Replies
9
Views
2K
I What will the angle of a boat with an outboard motor be?
Replies
12
Views
1K
Water Velocity Question: Impact of Pipe Length on Flow Rate
Replies
39
Views
4K
Rate of water flow into an immersed container
Replies
3
Views
2K
I Find Best Water Nozzle Type & Pressure for Longest Distance
Replies
32
Views
9K
Friction loss in water flowing through a globe valve?
Replies
20
Views
3K
PressureDrop/Pressure/Volumetric flow rate calculation (in a Pipe)
Replies
5
Views
4K
Ejection speed and travel distance of a ball in a pressurized water pipe
Replies
8
Views
2K
I Flow rate calculation of coating application
Replies
30
Views
2K

Hot Threads

Recent Insights

Back
Top