Ranking Torque Magnitudes About a Pivot Point | F=2F=2F=F | 60° & 30° Angles

  • Thread starter Thread starter flynostrich08
  • Start date Start date
  • Tags Tags
    Magnitudes Torque
AI Thread Summary
The discussion focuses on ranking the torque magnitudes about a pivot point based on given forces and angles. Participants are trying to determine the correct order of torques generated by four forces: a (2F up), b (F down), c (F up), and d (2F down at 60 degrees). There is confusion regarding the pivot point's location and whether distances from the pivot to the forces are provided. The initial attempt suggests a ranking of b < a = c = d, but further clarification on the pivot and distances is needed for an accurate solution. Understanding the pivot point and distances is crucial for correctly ranking the torques.
flynostrich08
Messages
20
Reaction score
0

Homework Statement


Rank the magnitude of the torques in the picture below about the marked pivot point from least to greatest
(using <, >, =). The force magnitudes are in terms of F.

a=2F and pointed up b=F and pointed down c=F pointed up and d=2F pointed down to the left with 60 degrees from from the vertical 30 degrees from the line

_______a________c
b d

The Attempt at a Solution


a believe the answer is b<a=c=d or is d, a&c
 
Physics news on Phys.org
Where exactly is the pivot point? And do you have distances between the forces?
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Egg Drop Challenge! Need ideas for winning designs'

I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
View full post »

Similar threads

Where on a rigid body is a resultant force applied?
Replies
11
Views
1K
Force on a rotating wheel/disc
Replies
25
Views
2K
Rank Torque Magnitudes of 6 Forces on Door
Replies
2
Views
14K
Question about Normal Force and Torque
Replies
5
Views
3K
Effect of different magnetic fields on a magnetic dipole
Replies
25
Views
1K
Calculate the magnitude and direction of the torque
Replies
1
Views
2K
Question about springs and rotational/translational energy
Replies
4
Views
1K
Force pulling on a string at an angle with a block at the other end
Replies
2
Views
1K
Torque around a point from lever linkage
Replies
7
Views
2K
Isolated Point Charge and Work?
Replies
2
Views
3K

Hot Threads

Recent Insights

Back
Top