Resistivity of a material involving temp

AI Thread Summary
To determine the resistivity coefficients α and β for a material at 35 °C, the equation ρ=ρ0(1 + α(T-To) + β(T-To)^2) is used, with given resistivity values at different temperatures. By substituting the known values into the equation, two linear equations can be formed, allowing for the calculation of α and β. The calculated values are α = 1.3 x 10^-3 and β = 1.65 x 10^-5. To find the temperature at which the material becomes a superconductor, one can use the relationship that superconductivity occurs when resistivity (ρ) approaches zero, leading to a predicted temperature of -769 °C. This method can be applied to other metals, yielding varying superconducting temperatures.
Felicitymaroon
Messages
4
Reaction score
0

Homework Statement


A) To= 35 °C find α And β
B) determine the temp in which this material becomes a super conductor as predicted by the equation below.
ρ=ρ0(1 + α(T-To) + β(T-To)^2)To= 35 C. ρo=2.5e-8Ω m
T1= 0 C. ρ1=2.346e-8Ω m
T2= 100 C. ρ2=3.036e-8Ω m

Homework Equations


ρ=ρ0(1 + α(T-To) + β(T-To)^2)

The Attempt at a Solution


I'm not sure how to find beta or if there's an equation for it. I tried plugging in the information in the equation using To=35 C and T= 100 C . Please help. I'm lost!
 
Last edited:
Physics news on Phys.org
Where did this question come from? I know this type of question but I have never seen the equation written in this form.
I think the equation you have been given should (!) be
ρt = ρ0(1 + αt + βt^2)
where ρt is the resistivity at a temp tC
ρ0 = resistivity at 0C (2.5e-8)

If you use the information in the equation I have given you will get 2 equations from which you can determine α and β
I hope this helps you get further.
Have a go then contact me and I will tell you what values I got.
 
Last edited:
nope. the equation i originally posted is the correct one. Can you help me solve that one? I am pretty confused.
 
OK... I'll go through it again and get some answers for α and β.
I will let you know
 
Felicitymaroon said:
I'm not sure how to find beta or if there's an equation for it. I tried plugging in the information in the equation using To=35 C and T= 100 C .
Plugging the data given into the given generic equation should give you two linear equations in the two unknowns. In one equation you set T = T1, ρ = ρ1, in the other set T=T2 etc. T0, ρ0 are the same in both.
 
Using the values I listed in #2 I got α = 1.3 x 10^-3 and β = 1.65 x 10^-5

The value of α for aluminium = 3.8 x 10^-3
for brass σ = 1.5 x 10^-3 and for copper σ = 4.3 x 10^-3

Predicting the temp at which superconductivity occurs means pre3dicting the temperature when ρ0
would become zero.
This is essentially 1/α for metals. so in this example the temp would be -769C !
Doing the same for the other metals gives temperatures of aluminium -263
brass -666 and copper -230

Hope this helps (do you know what answers you are expected to get?)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top