Sandbag dropped from balloon - find final velocity

AI Thread Summary
The discussion focuses on calculating various parameters related to a sandbag dropped from a hot-air balloon. The balloon ascends at a vertical speed of 2.50 m/s and experiences a horizontal wind of 1.10 m/s. Key calculations include the horizontal displacement of the balloon, the distance from the launch site where the sandbag lands, the time taken to reach 205 m, and the final velocity of the sandbag. Participants are encouraged to share the equations used for their calculations to clarify the results. Accurate calculations are emphasized over guesses, highlighting the importance of understanding the physics involved.
Chupu
Messages
3
Reaction score
0
1. Experiencing a constant horizontal 1.10 m/s wind, a hot-air balloon ascends from the launch site at a constant vertical speed of 2.50 m/s. At a height of 205 m, the balloonist maintains constant altitude for 10.0 s before releasing a small sandbag. What is the horizontal displacement of the balloon? How far from the launch site does the sandbag land? How long it takes the balloon to reach the 205 m? What is the final velocity of the of the sandbag?

Thank you guys :)
 
Physics news on Phys.org


My guesses are the

horizontal displacement: 190m
how far from launch site: 180m
the balloon took: 82s
the final velocity: 6.018m/s
 


Why guess? All of these things are exactly knowable. What equations did you use for each result?
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Correct statement about a reservoir with an outlet pipe'

Thread 'Correct statement about a reservoir with an outlet pipe'

The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
View full post »

Similar threads

A stone is dropped from an ascending balloon...
Replies
10
Views
1K
A hot air balloon rises at a constant acceleration
Replies
7
Views
4K
Sandbag Dropped from Moving Balloon
Replies
3
Views
10K
How does the release of a sandbag affect the motion of a hot air balloon?
Replies
5
Views
6K
Finding position and Velocity of a dropped Sandbag from 40.0m above the ground
Replies
4
Views
7K
Constant Acceleration - Sandbag Dropped From a Rising Balloon
Replies
11
Views
10K
How Much Force Does Water Apply to a Sandbag Dropped from a Hot-Air Balloon?
Replies
1
Views
1K
Balloon and Ballast: Find Max Height of Dropped Ballast
Replies
6
Views
2K
Finding mass of cargo dropped from hot air balloon
Replies
4
Views
2K
How Does Balloon Motion Impact Stone's Fall Time?
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top