Searching for a Chemical Reaction to Produce Heat and Harmless Gas

AI Thread Summary
The discussion centers around finding a chemical reaction that produces heat and a harmless, breathable gas when reacting with air. The initial inquiry seeks assistance in identifying such a reaction. A suggestion is made to explore the chemical processes used in heat packs, which are commonly available in camping and sporting goods stores. The popularity of these heat packs implies they utilize effective and safe chemical reactions. A participant recommends searching online for information about the chemical reactions involved in heat packs, which could provide valuable insights. The original poster expresses gratitude for the guidance received, indicating they now have a clearer direction for their inquiry.
lrussell
Messages
3
Reaction score
0
Hi,


wondering if you could help me.
I want to find a chemical reaction that would involve:


Reactant + Air (or gases present within)----Exothermic----> Harmless gas

Any help would be appreciated if you knew of a chemical that I could use to react with air to produce heat and a harmless gas(es). The aim of the reaction is just to produce heat by the way. Not interested in what harmless gas is produced but it has to be breathable.

Thanks a lot

lrussell
 
Chemistry news on Phys.org


lrussell said:
Hi,


wondering if you could help me.
I want to find a chemical reaction that would involve:


Reactant + Air (or gases present within)----Exothermic----> Harmless gas

Any help would be appreciated if you knew of a chemical that I could use to react with air to produce heat and a harmless gas(es). The aim of the reaction is just to produce heat by the way. Not interested in what harmless gas is produced but it has to be breathable.

Thanks a lot

lrussell

Welcome to the PF.

This technology is used in "Heat Packs" that activate when exposed to air. You should look into what chemical process they use. You can find them in the camping section of your hardware store, or at sporting goods stores.

S_Head_02b.jpg
 


Thanks, any idea what chemicals react though? I'll look into the bags as well to see if it says
 


lrussell said:
Thanks, any idea what chemicals react though? I'll look into the bags as well to see if it says

I'm an EE, so no clues about the chemical reaction that is used. However, because of the popularity of hot packs, I'm guessing they are using probably the best available reaction, and are relatively safe.

To get more info on the reaction, I googled Hot Packs Chemical Reaction With Air, and got lots of hits. Hopefully these help:

http://www.google.com/search?source...action+with+air&gs_upl=0l0l0l5004lllllllllll0

.
 


Thanks a lot you've been a huge help. I know what to use now
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top