SHM - Finding Distance and Direction of Oscillating Particles

AI Thread Summary
Two particles oscillate in simple harmonic motion (SHM) with a period of 1.5 seconds, differing in phase by π/6 radians. The discussion focuses on calculating their distance apart 0.50 seconds after the lagging particle starts its motion. The initial calculations using the equations for SHM resulted in a discrepancy with the expected answer from the textbook. A correction is suggested, emphasizing that the motion should be modeled with the amplitude adjusted to A/2, as the particles oscillate within a segment of length A. The correct approach leads to a more accurate distance calculation between the particles.
LandOfStandar
Messages
60
Reaction score
0
SHM - Simple Harmonic Motion Question

Homework Statement



Two particles oscillate in SHM along a common straight-line segment of length A. Each particle has a period of 1.5s, but they differ in phase by π/6 rad.
a. How far apart are they 9in terms of A) 0.50s after the lagging particle leaves one end of the path?
b. Are they then moving in the same direction, towards each other, or away from each other?

Homework Equations



X = A cos(ωt + θ)
T = 2π/ω

The Attempt at a Solution



T = 2π/ω Tω = 2π ω = 2π/T
X = A cos(ωt + θ) = A cos [(2π/T)t + θ] =
A cos [(2π/1.5)t + 0] and A cos [(2π/1.5)t + π/6]
A cos [(2π/1.5)t + 0] - A cos [(2π/1.5)t + π/6], t equals .5s
(-.50)A - (-.87)A = .37A, but the answer in the book is .18A.
What did I do wrong?
 
Last edited:
Physics news on Phys.org
Bumping up so someone could tell me what the think.
 
anyone
 
Just to give the correct answer. Your passages were all good except for the first one. The equations describing the motion of the particles are: (A/2)cos(wt + H) and (A/2)cos(wt) and not just A, because the segment is long A and so (knowing that the cos goes from -1 to + 1) a partile moves from A/2 to -A/2. Substituting A/2 the computation should be right!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top