Simple Harmonic Motion and equilibrium

AI Thread Summary
The discussion revolves around calculating the speed of a 100-g block in simple harmonic motion when displaced from its equilibrium position. The block is initially 0.20 m below equilibrium and moving upward at 2.10 m/s, with a spring constant of 5.2 N/m. The correct speed at a displacement of 0.324 m is identified as 1.02 m/s, but the user struggles to derive this value using their calculations. Key equations of motion are discussed, including the relationship between angular frequency, amplitude, and displacement. Ultimately, the user realizes the need to correctly apply the formula for velocity in simple harmonic motion, which involves using the amplitude and displacement.
Patdon10
Messages
85
Reaction score
0

Homework Statement



A 100-g block hangs from a spring with k = 5.2 N/m. At t = 0 s, the block is .20 m below the equilibrium position and moving upward with a speed of 2.10 m/s. What is the block's speed when the displacement from equilibrium is .324 m?

Homework Equations


w0=sqrt(k/m)
x(t) = Bsin(w0*t) + Ccos(w0*t)
v(t) = w0Bcos(w0*t)-w0Csin(w0*t)

The Attempt at a Solution


I know the answer is 1.02 m/s, and I'm not getting that at all : /

w0=sqrt(k/m)
= sqroot (5.2/.100) = 7.2111 rad/s

x(t) = Bsin(0) + Ccos(0)
x(t) = B

v(t) = w0Bcos(0) - w0sin(0)
v(t) = w0B
1.9 = 7.2111B ---> B = 0.26348

x(t) = Bsin(w0*t) + Ccos(w0*t)
0.297 = 0.26348*sin(7.2111*t) + (0.2)cos(7.2111*t)
0.297 = 0.03307344t + 0.19841808t
0.297 = 0.2314915203t
t = 1.28298436

v(t) = [(7.2111)(0.26348)cos(7.2111*1.28298436)] -
[(7.2111)(0.2)sin(7.2111*1.28298436)]

v(t) = 2.418364634 - 0.2318690865
v(t) = 2.31869 m/s


Can anyone see what I'm doing wrong? Thanks in advance!
 
Physics news on Phys.org
In the simple harmonic motion the velocity is given by

v = \omega\sqrt{(a^2 - x^2)}

You have found ω. From the given data, you can find the amplitude a. In the second case using a and x, find v.
 
Is the amplitude simply:
x = Asin(w_0*t)

I don't think that equation would work, because I don't have a time in the given. Or would the amplitude simply be what B is, because it matches the amplitude equation.

edit:
of course that wouldn't make sense either because that would make V a non-real answer.
 
2.1 = 7.2111(a^2 - 0.2^2)^1/2

Solving this you get

a^2 = 0.1248. Next

v = 7.2111(0.1248 - 0.324^2)1/2

Solve this to find v.
 
Thanks for the response!

ok, I see now. I should have been able to figure that out from the givens. I didn't understand why you didn't have a squared on the amplitude in the equation, but I see you already added it. Why would my method not work? What am I doing wrong?
 
simple harmonic motion is expressed as

y = Asin(ωt) or x = Acos(ωt)

The velocity at any instant is given by

v = dy/dt = Aωcos(ωt) = ω(A^2 - y^2)^1/2
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top