Solving for Magnetic Flux in a Rotating Wire Loop

AI Thread Summary
The discussion focuses on calculating the change in magnetic flux for a wire loop with a semicircular section when it is rotated through half a revolution in a constant magnetic field of 0.75 T. The initial calculation of the change in flux is derived using the formula Change in flux = BA[cos(final angle) - cos(initial angle)], resulting in a value of -0.094 Tm². A key point of confusion is the interpretation of the final angle being 180 degrees, as the user struggles to understand why the angle is not zero despite the loop remaining parallel to the screen. It is clarified that the change in flux is attributed to the change in the area of the loop rather than the angle itself, as the semicircle's orientation flips during the rotation. The discussion emphasizes the importance of understanding the area change in magnetic flux calculations.
lovelyrwwr
Messages
48
Reaction score
0
ID1188_cyu22_012.png


1. A loop of wire has the shape shown in the drawing. The top part of the wire is bent into a semicircle of radius . The normal to the plane of the loop is parallel to a constant magnetic field of magnitude 0.75 T. What is the change in the magnetic flux that passes through the loop when, starting with the position shown in the drawing, the semicircle is rotated through half a revolution?



Homework Equations


A = Pi(radius^2) / 2 = (Pi)(0.2^2)/2 = 0.0628
Flux = BA

The Attempt at a Solution


Change in flux = final flux - original flux = BA[cos(final angle) - cos(initial angle)]
Change in flux = 0.75(0.0628)[cos180-cos0] = -0.094 Tm^2


I already know that the answer is -0.093 Tm^2.

But I am unsure how why the final angle is 180 such that you get a flux that is negative as calculated below. I guess I just cannot conceptualize WHY the the angle is 180 degrees when the wire goes through half of a revolution. I mean, when it goes through this half-revolution, the plane is still parallel to the screen of the computer. Thus, isn't the angle between plane of the computer screen and the magnetic field (which goes into the screen of the computer) still 0?
 
Last edited:
Physics news on Phys.org
The attachment isn't viewable. Can you try to attach it again.
 
Yes here it is thank you!
 
lovelyrwwr said:
But I am unsure how why the final angle is 180 such that you get a flux that is negative as calculated below. I guess I just cannot conceptualize WHY the the angle is 180 degrees when the wire goes through half of a revolution. I mean, when it goes through this half-revolution, the plane is still parallel to the screen of the computer. Thus, isn't the angle between plane of the computer screen and the magnetic field (which goes into the screen of the computer) still 0?
The change in flux is due to the change in the area of the loop, not in any change in angle. Originally, the area of the loop is a rectangle plus a semicircle. But when the semicircle flips over, the area is now the rectangle minus a semicircle.
 
Wow - I pay for chegg to understand solutions to problems. It misled me to believe that it had to do with angle.

Thank you so much Doc Al. You always pull through!
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top