Solve Electricity Equation: Physics Problem Help

  • Thread starter Thread starter Zurtex
  • Start date Start date
  • Tags Tags
    Electricity
AI Thread Summary
The discussion revolves around solving a physics problem related to capacitors in an electrical circuit. The user seeks assistance in determining the through variable (current) and across variable (voltage) for two capacitors represented as a single component. It is clarified that the equivalent capacitance for capacitors in parallel is the sum of their capacitances, leading to the equation i = C(AB) * dv/dt. The correct formulation for the current through the combined capacitor is i = 2C * dv/dt if both capacitors are equal. The conversation emphasizes the application of Kirchhoff's laws in modeling physical networks.
Zurtex
Science Advisor
Homework Helper
Messages
1,118
Reaction score
1
Hi, I've been asked by mother to help out one of her friends with a physics problem (she is doing a maths degree and got a physics question) however my knowledge of physics in this area appears to be even more limited. So if I write the problem out here could someone please point me in the right direction to give help.

I will write out everything I was given:
Diagram (electrical circuit)

Code:
 A     i[sub]1[/sub]                 B
  [b]·[/b]------->---| |---------[b]·[/b]
  |      --->V[sub]1[/sub]           |
  |                       |
  |  i[sub]2[/sub]                   |
  -------->---| |----------
      --->V[sub]2[/sub]

Want to represent the 2 capacitors as a single component,

What is the through variable? (current) [i.e i1 + i2]
What is the across variable? (voltage) [i.e v1 + v2]

What is the component equation for the single component with current i and voltage v?

(I thought this was i = c \frac{dv}{dt} but it's not an option!)

Presumably this is a multiple-choice question, any help would be great thanks.
 
Physics news on Phys.org
What is the through variable? (current) [i.e i1 + i2]
What is the across variable? (voltage) [i.e v1 + v2]

Looks like those are answered right there. :confused:

What is the component equation for the single component with current i and voltage v?

Perhaps they're looking for the equivalent capacitance? If so, then capacitors in series (as these are) are equivalent to a single capacitor with capacitance Ceq=C1C2/(C1+C2).
 
Thanks I'll check it out with them :biggrin:
 
Some more help requested

The answer to the capacitor question has answers 2i=Cdv/dt

or

i = 2C dv/dt

but I am unsure as to the correct choice.

It should be borne in mind that this question is not really about physics but is rather about modelling physical networks and is taught in general terms where the same formulation is used for various branches of science.

So we are using Kirchoff's laws in general terms, given three sets of equations, component equations, vertex law equations and the cycle law equations.

Tired. :zzz:
 
Last edited:
TiredTeddy said:
The answer to the capacitor question has answers 2i=Cdv/dt

or

i = 2C dv/dt

but I am unsure as to the correct choice.

Well, I am not sure about the terms used in the problem, but usually A, B, ... mean nodes in a electric circuit. You can imagine that the circuit in the figure is a part of a bigger net. The two capacitors are connected in parallel with respect to A and B. For parallel connected components, the voltages are the same. The voltage is the same across both capacitors V(AB)=V1=V2 and the current which flows through the single component between A and B is the sum of i1 and i2, i(AB) = i1 + i2. The component equation for a capacitor is Q=C*V, and i = dQ/dt=C*dV/dt--->i= i1+i2 = C1*dV/dt + C2*dV/dt = (C1+C2)*dV/dt = C(AB)*dV/dt for the single component capacitor between A and B. If both capacitances are equal i = 2C*dv/dt.

ehild
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top