Solving a Problem with Transformer Load Resistance and Source Resistance

  • Thread starter Thread starter RigelulZ
  • Start date Start date
  • Tags Tags
    Transformer Weird
AI Thread Summary
The discussion revolves around solving a transformer problem involving load resistance, turns ratio, and source voltage. The user initially calculated the source resistance but arrived at an incorrect value of 77.4 Ohms. Participants suggested analyzing the voltage drop across the source resistance and the power relationship between the primary and secondary coils. Following this advice, the user recalculated using power and found the correct solution, emphasizing the importance of avoiding premature rounding in calculations. The exchange highlights the collaborative nature of problem-solving in physics.
RigelulZ
Messages
10
Reaction score
0
Weird Transformer Problem :(

Homework Statement



"In the transformer shown in the figure below, the load resistance RL is 44.0 Ω. The turns ratio N1/N2 is 2.10, and the rms source voltage is ΔVS = 77.0 V. If a voltmeter across the load resistance measures an rms voltage of 26.5 V, what is the source resistance Rs?"


circuit.gif




Homework Equations



See attachment for Equation of Rs

Rs.gif



The Attempt at a Solution



I plugged in my values for the formula i got for Rs but got it wrong? I got 77.4 Ohms

Does anybody know what I'm doing wrong? Because i sure don't.

Any help will be greatly appreciated, thanks in advance!

-Rígel
 
Physics news on Phys.org


RigelulZ said:

The Attempt at a Solution



I plugged in my values for the formula i got for Rs but got it wrong? I got 77.4 Ohms

Does anybody know what I'm doing wrong? Because i sure don't.
How are you analysing the problem?

Can you determine the voltage drop across the source resistance? Can you determine the power in the secondary coil? How is that related to the power passing through the primary coil?

AM
 


Andrew Mason said:
How are you analysing the problem?

Can you determine the voltage drop across the source resistance? Can you determine the power in the secondary coil? How is that related to the power passing through the primary coil?

AM

Wow, you were absolutely right, i did it through power like you instructed and it worked like a charm.. I also learned not to round too soon into the problem.. :/

Thank you!
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Physics - transformer / resistance question
Replies
4
Views
5K
The voltage across an AC source and a resistance in series
Replies
4
Views
2K
Calculating EMF and Load Resistance for a Motor
Replies
11
Views
2K
Internal resistance of the battery and energy transformed
Replies
14
Views
3K
Batteries, Resistance, Power, Potential, and Current
Replies
3
Views
1K
Ohm's law and Kirchoff — What am I missing?
Replies
4
Views
2K
An ideal (lossless) transformer has 4 times as many turns
Replies
1
Views
2K
Finding the internal resistance of battery
Replies
10
Views
3K
Transformer Load Regulation Old Exam Question Help
Replies
6
Views
2K
Engineering Source impedance using given voltage swing and power
Replies
2
Views
1K

Hot Threads

Recent Insights

Back
Top