Solving Gas Chamber Problem: Pressure Equality in 3 Compartments

AI Thread Summary
The discussion revolves around a problem involving a rectangular chamber divided into three compartments, where compartment A is heated, leading to a final volume of C being 49V. Participants question the feasibility of this scenario, noting that if the total volume is 3V, C's volume cannot logically be 49V. The consensus is that at equilibrium, pressures in compartments A and C should be equal due to the conducting wall, while compartment B, being non-conducting, may have a different pressure. Clarification is sought on the problem's parameters, particularly the final volume of C. The conclusion emphasizes that mechanical equilibrium requires equal pressures across the compartments.
Dr.azwar
Messages
10
Reaction score
0

Homework Statement


Consider a rectangular isolated(non-conducting) chamber as shown below. The chamber is divided into three compartments. The wall separating A and B has negligible mass, no friction and is conducting, while the wall separating B and C has negligible mass and friction and is non-conducting.

Initially each compartment has the same amount of air at temperature T, volume V and pressure P. Now compartment A is slowly heated through a heater such that the final volume of C becomes 49V. Now my question is that once equilibrium is attained can I assume that each compartment would have the same pressure? According to the answer given in my book the final pressure in A and C are the same however in B has different pressure. Is this possible?

Homework Equations


PV=nRT

The Attempt at a Solution


since at equilibrium there is to be no movement of walls hence pressure should be the same in all the three chambers[/B]
 
Physics news on Phys.org
I don't see any figure. Did you forget to include it?
 
thermodynamics.png
 
There is a lot about this problem statement that doesn't make sense. If the total volume of the 3 chambers is 3V, how can the final volume of chamber C be 49V? Maybe the final volume of chamber C is supposed to be 0.49V? The final pressure in all 3 chambers has to be the same in order for mechanical equilibrium to prevail. If the wall separating A and B is frictionless, massless, and conducting, then, at final equilibrium, chambers A and B will be in exactly the same state of T, P, and V.

Chet
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top