What is the average acceleration of a solid sphere rolling down an incline?

  • Thread starter Thread starter alex_boothby
  • Start date Start date
  • Tags Tags
    Motion Spherical
AI Thread Summary
The average acceleration of a solid sphere rolling down an incline can be expressed as (5/7) gsin(θ), though the origin of the 5/7 factor is questioned, with some confusion surrounding inertia values like 2/5. Calculations show an acceleration of approximately 0.6 using different methods, including the equation s = ut + 1/2 at^2. There is uncertainty regarding the consistency of results when calculating average velocity, particularly when comparing different distances. The discussion emphasizes the importance of deriving equations from fundamental principles like Newton's second law rather than using them without understanding. Overall, clarification on the calculations and the role of friction in rolling motion is sought.
alex_boothby
Messages
35
Reaction score
0
would

(5/7) gsinΘ (the symbol is a theta)

give me the average acceleration of a solid sphere rolling down an incline, I am not also sure where the 5/7 came from, I've herd of 2/5 for inertia but... AND is that linear acceleration or rotational.

that equation give about 0.6

i also get about 0.6 when i calculate the acceleration from my data by 2s/t^2 which is from s=ut+ 1/2 at^2


im also confused to why when i do v(final) - v (intial) / time
i do not get 0.6 well i do for the first value, then for the other distance i do not!
and ages ago i got 0.3 but now i can't even remember were that came from, i do get 0.3 if i do that eqaution for average v, but once again only for the first value.

thanks for any help, i think i just need reasuring that i am doing it right, as i have got .6 from to different things.
 
Physics news on Phys.org
Under no friction condition the particle will simply slide. You have mentioned nothing about friction here.
 
thats hasnt yet come into it yet, i want to verify that the above calculations are correct first
 
Sorry - its given to be rolling in the question.
Well the force on the body is mgsin(theta) and that should be the acceleration.
 
alex_boothby said:
would

(5/7) gsinΘ (the symbol is a theta)

give me the average acceleration of a solid sphere rolling down an incline, I am not also sure where the 5/7 came from, I've herd of 2/5 for inertia but... AND is that linear acceleration or rotational.
Don't just use some equation at random that you plucked from a book. Especially if you don't know know what it's supposed to be for.

That equation is correct (for a solid sphere rolling without slipping down a flat incline), but derive it yourself using Newton's 2nd law if you plan on using it. (You should be able to tell whether it's linear or angular acceleration by just looking at the units.)
 
well thers no inertia so i assume its linear, i tried to derive it from Newton second law, but got awfuly baffeled and decided long as it works nicely!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top